Milton S-466 Tire Valve Adapter Kit

works as it should and good price

Worked well for filling rear tractor tire with ballast. Vent valve for relieving air pressure worked well and it came with adapters for different valve stem threads.

It works. No matter how much you tighten the fittings it will leak some, or at least mine did. But it worked long enough to fill two rear tires with ballast on a Kubota B2601

This product worked just as advertised. Good quality and made loading my tractor tires a breeze. The exterior finish was good and it didn't leak due to the quality washer that was included. It took me about an hour and a half to load 60 gallons of liquid in each of the rear tires. Great time saver.

I had one of my tractor tires repaired, and needed to refill it with water. This is extremely handy and made the job simple.

used to fill rear wheels on a L 3901 Kubota the pump is a drill driven one $14 local I pumped 28 gallon.... each ... of windshield washing fluid in the rear tires using a low speed with a variable speed drill i pumped the ballast into the tires as fast as I could pour it into the bucket these fluid to tire adapters are well designed high flow, no leaks , fittings were gently finger tight seriously, I was surprised how well these worked these are not a cheaply made tool, it has fit and precision, all the sealing surfaces are very well done, the threads are sharp and square

Worked very well to put windshield washer fluid in my 2018 Kioti CX2510HST. Connected to a submersible pump with a short length of hose in a 5 gallon bucket. Device allows you to bleed off air from time to time as you fill.

Used to fill tractor tires with ballast. The larger end has a very sharp edge that cut three of my fingers 🤌 when connecting to garden hose.

Exact as per requirement

Couldn’t get the loose nut to seal on the valve stem when attempting to fill tyres with water. The fitted seal(s) seemed to be rock hard. Tried installing an O Ring without success but in the end I used teflon thread tape to slow the leak.

Llegó en buen estado...

​I bought this liquid ballast tool to fill the rear tyres on my International 674. I needed the extra weight for traction, and while the tool eventually did what it was supposed to do, it was far from a "plug-and-play" experience. ​The Good: ​Compatibility: The threads matched the standard tractor tyre valves without any issues, which is usually the main concern with these types of fittings. ​The Not-So-Good (The Leaks): ​Poor Sealing: Out of the box, the tool was essentially unusable. The main swivel connection leaked like a sieve as soon as the water was turned on. The internal seals provided just aren't up to the task, and I ended up getting soaked before I even got started. ​The Adaptation: It is not ideal to buy a brand-new tool and immediately have to work on it just to make it function properly. I didn't want the hassle of a return, so I ended up adapting the tool with my own O-rings to get a proper seal. It was only after I modified it with these extra parts that the leaks stopped and I could actually finish the job. ​Verdict: This tool does get the job done eventually, but you shouldn't have to provide your own parts just to make a simple valve work. If you aren't prepared to spend time adapting it yourself, you might want to look for a more reliable alternative.

Worked great, good quality and price