NH-U12A chromax.Black, 120mm Single-Tower CPU Cooler (Black)

It’s a premium product for a premium price. If you can swing the price the cooler is definitely worth it. It was packaged well, easy to install and it works. Keeps my 9900X cool while gaming. I have always preferred air cooling because they dont require disassembly for maintenance like AIOs. I have always herd that Noctua is the best around when it comes to air coolers and I now see why. My temps range from 41c idle to 45-65+ C while gaming. Ease of installation, low noise, looks and performance are the reason I recommend this cooler to any PC builder if you can afford it. The only real con is the price, it’s not cheap but it’s probably the best 120mm air cooler on the market

It’s a premium product for a premium price. If you can swing the price the cooler is definitely worth it. It was packaged well, easy to install and it works. Keeps my 13700K cool while gaming. I keep coming back to air cooling due to the noise associated with AIOs. Noctua is the best around when it comes to air coolers and this thing does it’s job. My temps range from 30 c idle to 45-65+ C while gaming. Ease of installation, low noise, looks and performance are the reason I keep coming back to this cooler. The only real con is the price, it’s not cheap but it’s probably the best 120mm air cooler on the market.

I have used Noctua cooling products exclusively over the last several years of building PCs for myself and for my family, friends and clients. There is always a consistent level of quality that comes from Noctua that has more than served me well. I just completed another DAW PC build using the Noctua NH-U12A chromax Black CPU cooler. I used this cooler on an Intel i9 processor and an ASUS motherboard in a 4U rackmount case with 3 other Noctua fans. This system now runs much cooler than the prior i7 based system I had running for my recording studio. This massive heat sink with two 120 mm fans gets the job done. The only slight issue that I encountered but I fully anticipated was the height of this unit in terms of the 4U rack case. It did fit but without any room to spare for the top of the case. There was a slight bulge where the very top bullet shaped protrusions of the cooler were slightly touching the top of the case lid. I remedied this by installing a 6" x 6" fan vent in the top of the case. It probably would have been fine the way it was but I did not want to cause any stress on the processor. Noctua now makes a special CPU cooler for a 4U rack enclosure but I preferred the two fan and larger heat sink of this particular model. All things said and done I am extremally happy with this product for my studio needs in terms of being dead quiet and being able to keep my system cool. The installation was straight forward and the instructions were intuitive and easy to follow. This is a well engineered and designed product that is well worth it's price tag. I am sure it will render years of reliable service as all of the prior Noctua products I have used in the past.

I am thoroughly impressed by the quality and performance of this cooler. Running a Ryzen 7 5700g, and upgrading from a coolermaster A17C (similar to stock), that idled/performed at 72/85c. The NH-U12A is currently idling/performing at 36/53c! With auto-overclocking pushing the processor past 4ghz, that is a monumental improvement, and far greater that I had ever dreamed I would get for the price. This is a small case sharing space with a 3090ti, 2xNvme, 2xSSD, and 2xHDD; so it already has it's challenges, but even my PWM case fans are running 20-30% slower than before. Mobo and GPU temps dropped by 1-2c as result of lower ambient and probably better airflow in the case, overall. The install used my existing AMD backplate, and the tower is offset to one side to allow for RAM clearance. I am running a micro-atx board in a somewhat cramped mid-tower case, and I was still able to install and work the fans in place fairly easily. Judging by the cramped conditions of my board, I would vouch for 100% universal RAM clearance, as the offset tower just does what it says it does; and the included fans are not thin by any means. As a bonus, the fans seem to be positioned just perfectly to draw intake air across the RAM an works well with my VR heatsink on the exit side of things. The included fans are smooth as glass, and surprisingly quiet at full speed; but I had to manually run them to full, as the CPU wouldn't heat past 53c (Fan RPM 1300'ish). Primo fans, no RGB, but that's what I wanted for this rig. The wires are well sheathed in tubing and heatshrink- wire management approved. If you've never dealt with this type of fan clip system, practice with them before you install the cooler. lol. I bought the add-on, decorative cover NA-HC7, which looks amazing on the installed cooler, and requires less effort to install than removing the side panel to get to it. This add-on should be RGB, as the cutout design is just too perfect not to be backlit. This kit did add height to the cooler, and my case is fairly small, but the glass panel clears everything by about 2mm. Everything came professionally boxed, shiny, and new; and you can just feel the care and quality in everything you touch, even the packaging. I rarely write reviews, and I am rarely impressed; but I was on the fence for weeks about a cooling solution on this particular rig, and I wanted to ensure others in my position can absolutely trust this cooler. Even versus watercooling, maybe. Dang.

Amazed that is keeping my ryzen 7950x3d cool .

Przesyłka dotarła na czas. Prawidłowo zapakowana. Samo chłodzenie działa bardzo dobrze. i7 11700k podczas długiego grania nagrzewa się maksymalnie do około 70-75 stopni C. W większości gier temperatury są między 60 a 70 stopni C. Wiatraki w trakcie grania są słyszalne, ale nie uciążliwe. To moje drugie chłodzenie od Noctua i spisuje się bardzo dobrze.

Quiet fans and great cooling ability.

Es un buen producto. Ya había pasado un año y medio desde que tuve mi PC, necesitaba cambiar la pasta como disipador. Desde que se me entregó el 27 de mayo, dure un rato en instalarlo, dado que estuvo difícil por su guía como en YT, pero al final fue fácil de instalar en realidad, solo un poco difícil colocar los dos ventiladores por su soporte. Les recomiendo usar plastinudo para colocarlos, es más fácil, no se lastiman los dedos y no rayan el disipador. También quiero agregar que la caja vino un poco golpeada abajo de un lado, siendo el derecho, y con la cubierta de plástico del disipador un poco rota, ya me había asustado que se hubiera rayado el metal o un componente roto como los ventiladores. La pasta térmica es muy buena como el Disipador. Antes tenía 40º en la PC al adquirirla, cuando la cambie tuve primero 25º a 32º, hasta ahora después de 2 meses solo me llega a 28º a 35º. Aunque bueno, tengo un i5-11400F. No sé cuál sería la temperatura de algo más pesado.

Bra formfaktor och mycket tyst.