Aim Sports Mosin Nagant 1-Inch Extended Recoil Buttpad

I received it rather quickly. It fit perfectly. It was really easy to install. It took less than five minutes. Just like everybody else in their review said. It did smell strongly or ever like a tire, but the joke’s on you, I’m into that! I like how it smells. And after about two or three days sitting on my desk, I don’t smell it anymore. I saw some people have been worried to drill out some of the holes, but I drilled out all the holes. I had no problems. It’s not gonna bother the screws inside. The screws are still safely below, Benny, out of the way of the holes that you wanna drill out. So I drilled out all the holes. And I’m in the Stone Age without a functioning electric drill so I did it by hand with the drill, bits in my hand. And it hurt. But I did it. And use of a X-Acto knife is helpful. And I used pliers to pull out the rubber boogers. It was hard. I did it. If you have a functioning drill with a call that can hold larger than a 8th inch unlike me, i’m sure you’ll have an easier time. But that’s on me. The product is great. There is an air gap between the wood, and the beginning of the rubber butt stock. For all I know that’s a benefit because it’s a spring laden air gap that will have to be compressed resulting in more shock absorption in a similar way as the holes. I can probably shim and shove some foam in there. After I got it installed, and drilled out the holes, I shoved a recoil reducing slip-on sock over it. it barely fit, but in the end it did fit very snugly. It was hard. I had to use pliers to pull that thing over this and the wood. It was tight. But that’s good because it’s not going to be slipping and sliding or falling off I think. So not only am I using the rubber butt pad. I’m also using a slip over recoil reduction sock and it feels kind of like jelly, like a stress reducing ball. I have not used this at a range since I installed it and I have no idea what it’s going to feel like. But I’m sure my shoulder will thank me.

This butt pad fit fairly well on my Mosin Nagant M91/30. As some other people have stated in their reviews, it does have a funk smell to it and the rubber is kinda hard. Both of these factors are not really detrimental to the product. First you have to consider that this piece was shipped all the way from China and it is made out of rubber, so you can expect it to have some sort of "odor" to it. As for the stiffness of the rubber itself, you can just drill through the holes that are on the sides to make them connect. This was recommended by a previous reviewer, and by doing this it will give you some flex in the rubber and make it a bit softer when shooting. I did this to mine with a 3/8 drill bit and it worked great. The only hole that I did not drill is the one that comes close to where the screw hole passes through from the back of the butt pad. All the other holes got drilled out. For $10, this is a good product that works great and does what it is supposed to.

Hello all, this recoil pad is a defined must have. The Mosin Nagant 7.62 X 54r round has a felt recoil of a O/U 12g shot gun with no recoil pad. So after 10-20 shot you shoulder will go numb. The pros: -Installs in 5 min, 2 screws. -Has a overall good "general" fit to my Mosin 91/30. I did have to bend mine a bit to make it fit the curvature of the rear stack but no big. -Adds about 1 to 1.5 inch to the length of pull, and that is a bonus since I found the stock to be a bit on the short side. -It is made of semi hard rubber so it should last a long time, only time will tell. - Reduces felt recoil, my 16 year old niece can now shoot it with out issue (at a rest, its to heavy for her to hold standing). The Cons: -The rubber pad will stick to your cloths, I had to taped the sides of the pad to fix this. -The fit is not exact. My pad seem to stick out both sides and the top of the stock about 1/16 or so on each side. And about 1/8 inch at the top. Not to much but it does cause the top to grab when I go to solder the gun. I find myself having to push the gun out then shoulder it. Over all I would say this is the best "mod" you can do to this rifle for the price. Made my rifle more enjoyable to shoot, and definitely allows female shooter to join in. *Note: on the seller of this product. I have did/do have an issue with the seller, I have taken this up with Amazon. But the product is great. I had ordered a new sling, well attempting to reach the seller is virtual impossible. I tried for 4 day. I have tried via Amazon nothing, I have tried via their web site(contact us) section, still no response. I did find a number and after holding for about an hour, I was told that the sling it in actuality on back order. Even though it shows to be in stock. Note: the "leave a message option will disconnect you from the system Even better, the agent I spoke with was unable to tell me when they would be getting more in. Or when they would be placing an order to get more from their supplier. Thus I may not revive my sling (and you wont/may not get yours ether). Your mileage may vary but you can count on a very difficult time getting a hold of the customer service if anything goes wrong.

Fit my original m91 with original screws nearly perfectly. In the image the only modification made was me loosely drilling out the holes for some more sponginess, and I will be cleaning them up a bit. I was going to boil the rubber and soak it in oil to loosen it up, but after shouldering the gun in this state, decided that was not necessary. A noticeable improvement in comfort and extremely easy to install. The only downside is the strong tireshop smell, but it is a solid chunk of rubber so that should be expected.

This item will fit your MN, but it is not a perfect fit. You will of course have to remove the original metal backing plate on the butt end, and don't forget it significantly adds to you LOP. Having said that, if you are like me and have long arms, it is a nice addition to your rifle.

I must be one of the lucky ones... it fit my '44 M9130 perfectly. I did remove the steel butt plate and and compared to the rubber pad and it was an exact match. Gives a much needed length of pull and way more comfort than the steel. Plus it really looks good... like it belongs there. The curve of the pad where it contacts your shoulder is more exaggerated than the steel and therefore fits into my shoulder better. One reviewer was right...this thing stinks so bad... like walking into a tire factory. Look on the confuser for tips on how to at least take the edge off the smell. I think it's going to take a little time to "gas out" completely.

Pros: - Easy to install (You can pop it right onto the metal buttplate if you want) - Adds a decent length of pull (Always helpful with the mosin stock) - Definitely reduces the felt recoil (Always helpful) Cons: - A few fitting adjustments required (Always a given with milsurp aftermarkets, I had to drill in some new holes into the stock and sand down the edges)

One of my mosin friends recomended this to me and it was worth it. Went on easy and feels good, now I don't have to worry about my shoulder breaking after a few shots. Anyone with a mosin should definitely pick one up.

Shoulder saver, fits snugly over the metal butt plate.