Honda Factory Clock Light Bulb - 35505-S84-N01; 1998 to 2002 Accord, 1999 to 2004 Odyssey (1)

Perfect.

Matches up perfectly with the rest of the dash. Quick installation thanks to watching the how to videos on YouTube prior to installing. When removing the clock you want to use a plastic pry tool and slip it under the front bottom edge of the clock. Be very gentle because the climate control bezel around the clock will crack if you use too much force. You will only need a medium size flat head screwdriver to twist the old bulb out and to twist the new bulb into place. If you use a metal screwdriver to remove the clock there is a good chance you'll crack some plastic so consider ordering the interior panel pry tool kits sold for under $10 elsewhere on Amazon.

This fixed the clock back-light on our 2001 Honda Accord, which had been out for years and a Honda shop told us was very difficult to fix requiring the removal of the dashboard. Not True! There are several instructional videos available on YouTube, and it was easy to do. Took us less than 5 minutes. Suggestion: use a second person to hold the assembly after you get it out of the dash, and then you don't even have to remove the 2 wire bundles. Can do the whole job with a single flat-bladed screwdriver...

The clock light installation was very easy, wish I had done this years ago. From reading other reviews and watching installation videos, I did buy a "Interior Trim Took Kit" to help remove the clock (as opposed to using a flat blade screwdriver). With the purchase of the "Interior Trim Took Kit" the total cost of installation was $19.68 and 10 minutes of labor. One thing if you check to see if the light is working before you reinstall the clock, make sure you have the ignition in the "ON" position so at least the dashboard warning lights come on.

2002 Honda Accord, super easy install with a pry tool and PH2 screwdriver (standard size Philips head). Works fine. Expensive for one tiny bulb. Didn't look like it worked in daylight (even with the headlights on and my hand cupping it to cut out most light), but early morning proved it worked.