Musiclily 52.5mm Guitar Stratocaster Tremolo Bridge Set for Fender Strat Squier Electric Guitar Replacement, Black

I am working on a project guitar, which had a low budget but functional trem bridge that was chrome. This bridge is of the same quality, but with a black finish. I have no complaints about the finish. I was reluctant to buy it because one of the reviews mentioned the paint scratching off easily, as if it were just cheaply spray painted. I tried scratching the paint with a screw driver on the under side of the bridge just to make sure the paint wouldn't flake off easily, and it was fine. Of course, it will scratch off like even the best luxury car paint, but it's definitely not anything substandard in that way. For the fit, it was a direct replacement for the screw holes of the original bridge I was replacing, but I did need to route out a larger hole in the guitar to allow the bridge to travel because he underside where the bridge meets the trem block was a bit different than my original. That was mildly annoying, but I took care of it within 20 minutes because I luckily had a trim router and the right router bit for the job. I then painted over the bare wood from were I did the routing out. I can't say if this would be needed for another guitar, but I wanted to mention I needed it for mine, so that might be worth considering if you aren't sure you are able to do that kind of modification. This is definitely not the kind of quality you can expect from a Floyd Rose, but I'd say it's about equal to the quality of the trem bridges that come on Squire stratocasters or similar low budget style with the screw in trem bar. So I rate it 5 stars for the low price and matching low expectations.

I bought this for a budget build where the trem would not be used. I did change the saddles as I like rollers, but it wasn't needed, just preference for me. Overall very good, solid feel looks nice and doesn't cost much.

This Musiclily 52.5mm Guitar Stratocaster Tremolo Bridge went on my Stewmac kit build, which I really like. Its mounting holes lined up exactly with the kit. The unit is nearly flawless, with one exception: the black coating on the saddles began to chip a little. These tiny chips exposed the brass underneath. Because they chips were not perfectly even, I pro-actively filed the grooves in the in the saddles to make them more uniform. You can see the filed spots if you look closely enough. I swapped its trem block for another, heavier one from the same supplier. It works perfectly.

My son had broke the tremolo bar off from over tighting so I ordered a replacement bridge and it mounted perfectly in a fender starcaster. An exact fit.

I've gone with this bridge twice now and very satisfied . This is a nice replacement rather than upgrade in most cases, but also a good partscaster tremelo for your cheap builds. For 13 bucks the quality is great, comes with everything you need (the tiny allen wrench for the saddle adjustment is super appreciated!) and everything is solid and looks really nice. Love the black, but I think the chrome is even nicer. Had to drill for both guitars but works like a charm. I don't use the actual tremelo bar much , it will do a surfy type thing but is not going to divebomb or floyd status. I'm more interested in how the strings feel, how it stays in tune and of course the buzzing. Very satisfied in that regard. How your action and setup goes will depend on multiple factors but I got both going very nicely and no need to replace. Compared to two guitar fetish and one squier bridge I have on my guitars currently it's just as good or better.

I bought the Musiclily 52.5mm tremolo bridge for a budget Strat-style project. It works, but there are definitely some quality issues. The hole for the whammy bar is misaligned, so the tremolo arm won’t thread in correctly. Personally, this isn’t a big deal for me because I don’t use a whammy bar anyway, but if you plan on using the tremolo arm this could be a problem. The other issue I ran into was with the height adjustment set screws. One of them stripped while I was adjusting saddle height. That could partly be on me, but the screws do feel pretty soft compared to higher-quality bridges. Overall, it’s a cheap bridge and it basically works, but the hardware quality reflects the price. If you’re doing a budget build and don’t care about using the tremolo arm, it might be fine. If you want something more solid, you may want to spend a little more.

Nice and solid, well built. Bought it to fit on a Fender Squier Stratocaster on which I was replacing everything except the body. First time I have been so ambitious. Of all the new parts this bridge/tremolo was possibly the easiest to install, had no problems - it dropped right in place, with everything fitting perfectly, did not need to fill and drill holes etc or make any modifications to anything. Still working on the fine adjustments but so far is doing a fine job. Also the flawless gold finish looks awesome against the new cherry sunburst paint job.

For an entry level vintage style tremolo system, this thing is amazing. It does the job, dropping into most imported any import guitar and looking similar, if not the same to OEM. I installed this particular trem bridge into an SX Hawk I picked up for cheap, and this Musiclily bridge was identical to the OEM (less the corrosion). “But why did you ding this vibrato a star?” Good question. An entry level bridge is still an entry level bridge. I wouldn’t dare install this into a higher-end guitar, as this trem block is understandably paper thin for the price. The trem arm is simply screw in with no retention assistance beyond the friction of the threads. Basically, it’s super basic, found on just about every beginner S-style guitar, everywhere you could look. But again, price for what you get: Can’t beat it. That said, I also cannot in good conscience give it 5-stars as there are better affordable bridges out there if one would want to spend a few more bucks. As for me, I tried to keep my refurbishment costs to a minimum, and this did the trick perfectly. Would I buy again? Yes, but only for another “gotta keep the costs down” beginner guitar overhaul.

Fits perfectly.

生音での響きが良かった。 サスティーンが効いているて事だと思う スプリングは強くもなく弱くもなく、 6点止めの仕様ですが、2支点で使用した ところアーミングしてもチューニングが 狂い難い設定に出来ました。 調整の仕方次第ですが、使える製品です。

Great bridge zero issues works perfect nice quality and used a few of them and no issues at all and great price fits perfect

Bridge arrived exactly as described so all good. The block is a bit weaselly, but that's to be expected at this price - if you go with this option, you might want to upgrade with a brass block later.

A no hassle to install black replacement or change (in my case from chrome & white to all black as pics provided show) Bridge that fits a Fender Stratocaster perfectly so it'll fit most replicas too. There is an all black Whammy Bar included with it that also looks the part it's just not in the photos as I don't use them. All in all it's a fine, solid, good quality item that had a kind of metallicy matt like finish to it, it looks the part.