TP-Link Deco WiFi 6 Mesh WiFi System(Deco X20) - Covers up to 2200 Sq.Ft, Replaces Wireless Internet Routers and Extenders, 1-Pack

Dead zones are a special kind of frustration. That one corner of the house where your video call freezes, the back bedroom where streaming buffers every few minutes, the garage where your phone gives up entirely. The Deco X20 exists to solve exactly that problem and it does so with a minimum of fuss. Setup is where this system immediately earns goodwill. The Deco app walks you through everything in plain language and the whole network was up and running in under fifteen minutes, which for networking hardware is practically unheard of. No cryptic router menus, no digging through settings pages that look like they were designed in 2003. Just a clean app experience that gets out of your way fast. WiFi 6 makes a tangible difference in a busy household. Multiple people streaming, gaming and on video calls simultaneously without anyone complaining about lag is the real world benchmark that matters, and the X20 handles it comfortably across 4000 square feet without breaking a sweat. Coverage is genuinely seamless as you move between rooms, with devices handing off between nodes so smoothly you never notice it happening. The units themselves are compact and understated enough to sit on a shelf or counter without looking like networking equipment someone forgot to hide. That sounds minor but in a living space it genuinely matters. For very large properties or extremely demanding multi gigabit needs there are more powerful options out there, but for the overwhelming majority of homes this system hits a sweet spot of performance, simplicity and value that is difficult to argue against.

For years I've lived with pretty good WiFi from my network provider's Internet modem, with the exception that there were some dead zones in my house. In addition to that, it has dual-band 2.4GHz and 5.0GHz networks. When I encounter a Wifi dead zone with my phone, I would then have to manually try the 2.4GHz (slower) network, or switch the phone into 5G cellular mode. Frustrating - and not optimal. I looked into WiFi repeaters and extenders, but all the research to find a better working, and integrated, WiFi experience was leading me to build a Mesh Wifi network for my home. After watching lots of product reviews on-line, I finally decided on the Tp-link Deco X20 system. I purchased a 3-node solution. Node 1 is in my office and connected to my Internet modem. Node 2 in the living room with my home theater, and node 3 upstairs in my bedroom. Now I have decent and reliable Wifi signal throughout the house, with speeds ranging from 500mbps, to about 150mbps in the most distant areas. Set up was very easy. I chose to set up the X20 as a WiFi access point (AP mode), and not use the X20's router functions. This means that my Internet modem is still in charge of DHCP and assigning IP addresses to all devices downstream, and that all devices on my network can talk to each other, because they are all on the same subnet. In addition, the AP mode allows me to leave the original WiFi networks turned-on, and migrate these devices to the new mesh WiFi, as needed. Two important things to note about the Deco X20 system. First, the 2.4GHz and 5.0GHz signals are combined into one SSID. If switching is required, the Mesh Wifi does this seamlessly in the background - so you don't have manually switch WiFi networks on your device. Second, the nodes have two wired network ports. In my office, one of these ports is used to connect the node to my Internet modem. However, it is possible to use the other network port, and the two ports on the other two nodes, for devices that are sitting close to the node. For example, upstairs I have the Deco X20 node sitting next to a Roku Ultra video streaming device, which has a network port on the back of the unit. Rather than telling the Roku to use Wifi to connect to the mesh Wifi network, I can just connect a short network cable from my Roku to the Deco X20 node, and the Roku now thinks it has a wired LAN connection. Wiring a device directly to the node, where it is convenient to do so, should provide a faster connection, because there is one less network hop for the data to jump through, to get onto the network. In short, the Tp-link Deco X20 this is a very good product, easy to set up, and I recommend it as an affordable way to get started building a mesh WiFi.

I'm an IT geek / software developer for a living. I know all about how this stuff works and I wanted fast, but I didn't need crazy expensive for my home and some of these mesh systems are way overpriced IMHO. Reality is you can have all the latest crazy standards but once you get 20ft from the access point all bets are off and you'll never see the speeds you see quoted so you need to mix practical with price. There seem to be sooo many mesh system options these days, that I was overwhelmed, but after some consideration I thought I would just go for this one which seemed reasonably priced, but still offered most of the latest standards (and thus speed limits) and also had free returns! In this case this config with 2 slave units was great for my ~4500 sq ft house, my previous single access point left some dead spots (like my Ring outside the house) just outside the range. But with this setup I can blanket the house and get pretty good speeds (>100-200Mb throughput) just about everywhere, and faster (400+ when you are reasonably close / line of sight to the access point) It's important to remember when thinking about laying these out in your house what and where you need the speed. If you need speed inside your house (say you are always streaming movies from a pc to another device) or if you need speed from a device to the internet. The slave access points can only provide as much throughput back to the main access point (which is probably directly plugged into your router/internet) as good as their own wireless connection is to EACH OTHER. eg: if you put the slave access points 50ft away they might "only" be able to get like 20Mb back to the internet, as your devices is going from device -> slave access point ->* main access point (next to your router/internet) and the * connection is the weak link. What was the killer feature for me on these is you can actually use ethernet as a backbone for the slave access points. My house is pre-wired with ethernet so I was able to put the slave access points pretty far but every slave is hardwired back to the main access point and thus has 100% of the throughput back to the internet so no matter which access point you connect to in the house each access point is as fast as the main one so the access point to access point speed drop is a non-issue if you can set it up like this. DO THIS IF AT ALL POSSIBLE! It's like having 3 "full speed" access points strategically dropped through your house. It wasn't obvious I could do this from the (very basic) docs for setup that came with it, but a quick search through the online docs showed you could this and it's brain dead, just plug your home network into the port on the back. Extra bonus feature, you can use the 2nd port on the back as a local hardwired port so if you have a single PC or "device" (like an xbox or something) next to the access point you can still plug it in directly and get full hard-wired speed without needing to buy an extra switch in the middle. Note: If you don't use the 1st port for the backbone, then you get 2 ports for local devices that will get at least Access Point -> Access Point speeds without one more wifi hop needed. I was pretty impressed with the iPhone app that you use to manage the setup, gone are the days of a webbrowser hitting a super slow admin page, the app is snappy and you can tweak all kinds of stuff. (favorite feature: One of the access points ended up in a kids room and they complained about the LED at night, guess what, turns out there's a "night mode" where it turns off the LED's during a timewindow in the settings pages!) The "mesh" part works really good too, from the app you can see your device move from access point to access point and what devices are on which and stuff. Super handy for initial setup troubleshooting and geeking out over how it's all working. I will admit, I was a little nervous since TP-Link is sort of a more bargain brand in my head, but I've had it going for about 8 weeks now in my house and it's been basically flawless. I'm sold, I'd TOTALLY buy this again or recommend it to a friend (or anyone reading this)!

I have not had any issues with this mesh since initial set up. The set up is easy to follow and straight forward. I did have a minor issue, but that was on my end and my service provider was able to give me the correct information needed to set up. It has been running now for about 4 months and we have had steady connection across all devices - computers, TVs, gaming systems, smart home and surveillance systems. The back room that was often a dead zone now gets a good strong signal. I like that I am able to hard wire certain devices into each unit if I want to. We currently have the main home computer connected to the second unit, and the Xbox and smart TV on the third unit. Not that any of these devices were experiencing any lag or connection issues on wifi. It also has the option to set specific devices to priority on wifi or to set a device to only connect to one unit rather than the mesh to maintain a steady connection on items that are stationary. The parental controls are also a great feature. You do need to pay to unlock everything, but the free features are enough for my needs. It allows to filter content, block websites, and set up screen limits. The only inconvenience on the free side is that you cant set multiple time limits for differentdays of the week. While I can set a bed time daily, if I want to give extra time on the weekend I do need to manually reset it every week. However, it is not a big deal with the app. Wifi to all devices you set to your child's profile will be turned off at the time you set, and not turn back on until a time you set. Bedtime routines have gotten smoother as they quickly learned there is no "just a minute". They now take note of the time and hurry to finish, save their progress and say goodbye to friends before the time runs out.

This has worked out really well for us. We live in a good sized 4 bed villa and had lots of places with weak or no wifi. We now get good coverage everywhere and in the garden too. It was pretty easy to set up using the app, I just haven't worked out how to switch my Alexa and Sonos over to the new network, I'll fix that when I have some time.

I had a simple setup, which most of us have in our home a ISP router with a Wifi AP point installed in a central location. As I started adding more and more devices I started to have issues with the ISP setup and started looking for options. TP link was on sale and had read good things about the Mesh WiFi. No more dead spots and consistently get good speeds all around. Initially had a lot of trouble with the setup, contacted TP link support which I believe is still out of China. I had to undergo a lot of Troubleshooting with the TP link engineer which took two weeks and the final outcome was to RMA the devices. I have read forums and looks like some of these devices do have issues. TP link RMA policy is to ship the units back before they send a replacement. They do not pay for shipping. So if you have issues contact Amazon for replacements immediately. Pros:- 1.) Easy to setup. Deco app guides through the process of installation and also is less buggy. 2.) Homecare which comes by default for lifetime on the these devices is a good selling point 3.) Parental controls are good, at least I found them to be good for my purpose 4.) Have tested a 3 device setup with almost 60 devices turned on at a given time and it has worked as expected 5.) Have not had issues with smart devices which only use 2.4Ghz Cons :- 1.) Some of the new devices are plagues by issues which results in replacement of the entire unit. I had to replace 3 of my units 2.) TP link should be open about hardware revisions and what changes they bring in with such revisions 3.) RMA policy requires owners to bear shipping cost, not like Amazon return 4.) Turn around time to get a senior engineer at TP link to work on troubleshooting could take 2 weeks, since I believe engineers are in China.

Im using it in addition to a huwawei modem that has internet connection from a 4G sim card. I connected router to this device with the included wire and spread the 3 connection points between two floors. Now I have very strong coverage in every room!

Haven't found the performance to be particulary great and I had to find power supplies as they arrived with EU plugs and I'm in the UK. Aside from that, they were easy to setup and manage, but I've seen no where close to the speeds they boast :(