fischer DuoTec 10 S PH, toggle-plug with panhead screw, 2-component plug for fastenings in plasterboard, gypsum fibreboard, wood, steel & plastic panels, etc., 25 plugs & 25 screws

That is perfect for the plasterboard walls. It is very easy to fix.

Used to fit tv’s on walls. Easy to fit just need a 10mm drill bit. Really easy, best plaster board fixings I have used always get a good grip. Good value for money.

Fischer is my go to fixings manufacturer. These are great if having issue with large holes in sheet materials but still tend to use the Fischer duo wall plugs for almost everything due to cost.

I have knocked off some stars because the toggles were meant to come with m5 screws. Looking at the box it was a return and the screws either fell out and couldn’t be matched with the box.

Got sent 1 piece. Not 10 as described

Drilled holes as per instructions fitted the item however the plug would not accept the supplied machine screw in any of the ten I fitted, the screw just kept pushing the plug out of the way. Ended up knocking them out and used a different fitting. Don’t waste your money

Fischer are excellent and I use with confidence their wall plugs. I bought the duotec 12 after much deliberation. I consider these to be the next step up to red/grey plugs, in light that I’m drilling into walls made from old terracotta hollow blocks. I’m hanging 16” brackets on an no load bearing wall, so these need to get the best possible exposure to the void behind the plaster in the bricks. The problem is that, it’s very fiddly if the gap is small. I couldn’t measure the space in advance, I just knew the bricks were hollow. The first attempt missing the centre T hole then the screw pulls sideways at an angle as you hope it’s taken. After realising it’s going down the side of the hole you are widening the 12 mm drill hole. Then backing it out to re-evaluate, more mess and frustration. Second attempt made it but I needed to drill very carefully the back of what is the other side of the brick skin into the next room. A torch and a flat blasted screwdriver were then needed to force the toggle sideways, the T shape looses its return memory spring after such pushing and pulling. I did one of these but the remaining 5, I reverted to trusty Fischer 8 x 65, more confidence but technically less load capacity. Overall, I lost so much of the hole I wasn’t prepared to risk getting stuck on the others. I should have gone for a resin anchors and had no doubt. Too late. Plan B. When I’m using wall plugs I always drill the hole, clean it, wet it and put PU glue in as well as the on the plug. The PU expands and follows water, after it firms up apply the screw. This holds the plug firm especially if you happen to drill mortar. The Fischer plugs are perfect for this method too. Been doing that for years on heavy radiators. Fingers crossed! Solution reliance on pot luck if you don’t have a clear understanding of the material.

Je ne connaissais pas du tout ses cheville et surprise de se système qui est très solide par contre le prix et à revoir

Used these to hang something on a hollow brick. As soon as the plug experiences even the slightest force, the screw lets loose. Would not recommend this at all.

These blow away the old toggle type of Molly fasteners with their slimmer design. I recommend getting a long thin type of punch to help push the fasteners through thick dryway or drywall/plywood layers.

Die Fischer DUOTEC Dübel haben sich bei mir als wahre Lebensretter erwiesen, als ich vor der Herausforderung stand, schwere Gegenstände an Rigips-Wänden zu befestigen. Diese Dübel sind einfach unschlagbar. Was sie so besonders macht, ist ihre Vielseitigkeit. Sie sind für verschiedenste Anwendungen geeignet und halten mühelos schwere Lasten. Egal, ob es darum geht, Regale, Spiegel oder andere Dekorationen sicher an der Wand zu befestigen, die DUOTEC Dübel meistern die Aufgabe mit Bravour. Die Anwendung ist denkbar einfach. Die Dübel lassen sich leicht in die Rigips-Wand einsetzen, und die mitgelieferten Schrauben bieten einen festen Halt. Selbst bei häufigem An- und Abmontieren bleiben sie stabil. Ein weiterer großer Pluspunkt ist die Flexibilität dieser Dübel. Sie sind für verschiedene Schraubendurchmesser geeignet, was bedeutet, dass man nicht ständig neue Dübel kaufen muss, wenn man unterschiedliche Schraubengrößen verwendet. Die Fischer DUOTEC Dübel sind meiner Meinung nach ein absolutes Muss für jeden, der mit Rigips-Wänden arbeitet. Sie haben mir viel Zeit und Ärger erspart und bieten die Gewissheit, dass alles sicher an Ort und Stelle bleibt. Ich kann sie nur wärmstens empfehlen!

bonne cheville mais attention à la manipulation; reste malgré tout fragile pendant l'installation