TP-Link AX1800 Whole Home Mesh Wi-Fi 6 System - Covers up to 5800 Sq.Ft, Replaces WiFi Routers and WiFi Extenders, Works with Alexa, Deco X20(3-Pack)

This has worked out really well for us. We live in a good sized 4 bed villa and had lots of places with weak or no wifi. We now get good coverage everywhere and in the garden too. It was pretty easy to set up using the app, I just haven't worked out how to switch my Alexa and Sonos over to the new network, I'll fix that when I have some time.

To set up the Mesh WiFi, just connect one of the units to the ISP Router and turn everything on. The Deco App is very easy to use. The signal is strong and consistent.

Perfect and good choice

يعمل جيد و لكني لا أشعر بفارق كبير سوي بفرق السعر العالي

Terrible!!! Do not buy it!!!! Permanent disconnections, unstable speed and the customers service is a joke! If I could i would give zero starts.

Using in UAE: Once you get it up and running, it will work well. The application is often delayed in reflecting which units are up and running, but eventually gets it right. There is no support to speak of; emails go unanswered. One note: If you have ethernet wiring throughout your villa or home, and plug one of mesh units into a wall jack and it goes red, there may be a short in the wall which affects this particular unit. Try a different wall jack. I lost a couple days because of this issue.

The mesh system very easy to install, however the signal for the satelite router seems weak, particularly when the satelite is placed between walls with door closed. The speed significamtly become lower in such condition.

Disconnects very often

I have not had any issues with this mesh since initial set up. The set up is easy to follow and straight forward. I did have a minor issue, but that was on my end and my service provider was able to give me the correct information needed to set up. It has been running now for about 4 months and we have had steady connection across all devices - computers, TVs, gaming systems, smart home and surveillance systems. The back room that was often a dead zone now gets a good strong signal. I like that I am able to hard wire certain devices into each unit if I want to. We currently have the main home computer connected to the second unit, and the Xbox and smart TV on the third unit. Not that any of these devices were experiencing any lag or connection issues on wifi. It also has the option to set specific devices to priority on wifi or to set a device to only connect to one unit rather than the mesh to maintain a steady connection on items that are stationary. The parental controls are also a great feature. You do need to pay to unlock everything, but the free features are enough for my needs. It allows to filter content, block websites, and set up screen limits. The only inconvenience on the free side is that you cant set multiple time limits for differentdays of the week. While I can set a bed time daily, if I want to give extra time on the weekend I do need to manually reset it every week. However, it is not a big deal with the app. Wifi to all devices you set to your child's profile will be turned off at the time you set, and not turn back on until a time you set. Bedtime routines have gotten smoother as they quickly learned there is no "just a minute". They now take note of the time and hurry to finish, save their progress and say goodbye to friends before the time runs out.

Im using it in addition to a huwawei modem that has internet connection from a 4G sim card. I connected router to this device with the included wire and spread the 3 connection points between two floors. Now I have very strong coverage in every room!

Haven't found the performance to be particulary great and I had to find power supplies as they arrived with EU plugs and I'm in the UK. Aside from that, they were easy to setup and manage, but I've seen no where close to the speeds they boast :(

Product is sleek, setup is easy, good user interface for the mobile app. Speed is decent. WIFI/internet keeps dropping especially during video calls, watching netflix, etc. Reached out to TP link support...need to remind them multiple times. You cant get them on the phone....only through chat. This hasnt helped and I have wasted my time for over a month expecting they will fix it. Now I am stuck with a router that I just paid decent money for that is worse than my 5 year old router. Stay away!!!

I'm an IT geek / software developer for a living. I know all about how this stuff works and I wanted fast, but I didn't need crazy expensive for my home and some of these mesh systems are way overpriced IMHO. Reality is you can have all the latest crazy standards but once you get 20ft from the access point all bets are off and you'll never see the speeds you see quoted so you need to mix practical with price. There seem to be sooo many mesh system options these days, that I was overwhelmed, but after some consideration I thought I would just go for this one which seemed reasonably priced, but still offered most of the latest standards (and thus speed limits) and also had free returns! In this case this config with 2 slave units was great for my ~4500 sq ft house, my previous single access point left some dead spots (like my Ring outside the house) just outside the range. But with this setup I can blanket the house and get pretty good speeds (>100-200Mb throughput) just about everywhere, and faster (400+ when you are reasonably close / line of sight to the access point) It's important to remember when thinking about laying these out in your house what and where you need the speed. If you need speed inside your house (say you are always streaming movies from a pc to another device) or if you need speed from a device to the internet. The slave access points can only provide as much throughput back to the main access point (which is probably directly plugged into your router/internet) as good as their own wireless connection is to EACH OTHER. eg: if you put the slave access points 50ft away they might "only" be able to get like 20Mb back to the internet, as your devices is going from device -> slave access point ->* main access point (next to your router/internet) and the * connection is the weak link. What was the killer feature for me on these is you can actually use ethernet as a backbone for the slave access points. My house is pre-wired with ethernet so I was able to put the slave access points pretty far but every slave is hardwired back to the main access point and thus has 100% of the throughput back to the internet so no matter which access point you connect to in the house each access point is as fast as the main one so the access point to access point speed drop is a non-issue if you can set it up like this. DO THIS IF AT ALL POSSIBLE! It's like having 3 "full speed" access points strategically dropped through your house. It wasn't obvious I could do this from the (very basic) docs for setup that came with it, but a quick search through the online docs showed you could this and it's brain dead, just plug your home network into the port on the back. Extra bonus feature, you can use the 2nd port on the back as a local hardwired port so if you have a single PC or "device" (like an xbox or something) next to the access point you can still plug it in directly and get full hard-wired speed without needing to buy an extra switch in the middle. Note: If you don't use the 1st port for the backbone, then you get 2 ports for local devices that will get at least Access Point -> Access Point speeds without one more wifi hop needed. I was pretty impressed with the iPhone app that you use to manage the setup, gone are the days of a webbrowser hitting a super slow admin page, the app is snappy and you can tweak all kinds of stuff. (favorite feature: One of the access points ended up in a kids room and they complained about the LED at night, guess what, turns out there's a "night mode" where it turns off the LED's during a timewindow in the settings pages!) The "mesh" part works really good too, from the app you can see your device move from access point to access point and what devices are on which and stuff. Super handy for initial setup troubleshooting and geeking out over how it's all working. I will admit, I was a little nervous since TP-Link is sort of a more bargain brand in my head, but I've had it going for about 8 weeks now in my house and it's been basically flawless. I'm sold, I'd TOTALLY buy this again or recommend it to a friend (or anyone reading this)!