Wall Bed Retractable Spring Kit Hardware Mechanism, Bed Support Vertical Mounting Heavy Duty Inside 9 Springs High End for Home, Modern Hotel

Received fully scratched and half of the parts were missing also. Please don't buy.

Istruzione scarse e quasi illeggibili. Dopo un po’ di difficoltà per realizzare i mobili per il letto a scomparsa però la funzionalità e la robustezza sono eccezionali

Installing was a pain and took me nearly a whole day.Springs are enough for a 140cm bed.I had to take 4 springs out so it doesn't bounce back up

المنتج تالف

The mechanism is very efficient. The build quality I feel is cheap, but the mechanism is cheap. On the upside, its repairable if the welding fails. The legs supplied are only useful for aligning the bed to the correct hieght.My experience of using the kit is as follows: Once you remove the outside cover, you are exposed to the springs inside. I found that by removing the bolt, I was able to lift off the plate retaining the springs. Now I had the means to mount the plate to the side of my cabinet (I constructed one side of my cabinet and then fitted the inner section of plate). I was then able to mount the section of plate which had the springs to my bed base. When you undertake this part, I found if you mount the legs at the bottom of the bed base, it gives you the required hieght to mount the mechanism against the cabinet. Note: the legs are utter garbage. The weld is weak, poor construction. I just used them for the hieght for the bed mechanism. With my bed base proped up with legs fitted to the end, I was able to align my other side of my cabinet. Once this was aligned. I then fitted the square plate to the bed frame. This part took me quite some time, mainly due to being a fiddly job. However, once bolted onto the bed frame. The only job left is to re-fit the springs. Not knowing any better, I fitted back all the springs. Never, ever do this. For one, it's a pig of a job to fit them back and then you're left with a siege weapon. Personally, start with a maximum of 3 springs, I only used 2 springs when writing this review. The bed base is timber, with a 9mm Plywood base. And it only needs a bit of assistance in raising when you fold the bed away. And when you bring the bed down, it only takes minor assistance. I ended up with many spare springs.

Funciona bien