Mount-It! Speaker Mount for Wall and Ceiling, Low Profile Heavy Duty, Anti-Theft, Universal for Channel Surround Sound and Satellite Speakers, Black, 2 Mounts

Got these to hang HTD Level 3 center and L/R speakers. These are heavy speakers, at 26lbs for the center and 19lbs for the L/R speakers. Mounted into drywall, some with studs and some without. Overall, I'm very happy with the mounts. They're sturdy, well built, and the safety wire is a nice touch. They do hang off the wall several inches, but still look good. Installation is generally easy - the speaker-side bracket screwed into my HTDs' pre-drilled holes and used the speaker's own screws no problem, and the wall-side mount just required drilling some holes, tapping in the plastic drywall anchors, and screwing in the screw and washer. Like every included plastic drywall anchor I've ever used, several of them deformed when I tried to tap it into the wall, but I had some different drywall anchors on hand and used those for the occasional replacement. I think I replaced two of 12 overall. Speaker actually attaches to the bracket by inserting a metal peg that's part of the speaker bracket into a round hole that's part of the wall bracket and tightening a turnable lever to pinch the peg into the hole. My one complaint, and it's fairly minor, is that the speakers noticeably sag with these mounts. It was pretty concerning initially, but I don't see any signs that the mounts are coming away from either the speaker or the wall, and so they seem to be securely attached, even if they don't 100% look it. I'm not sure the mounts could be both adjustable and not sag, especially with speakers this heavy, though I have them set up to adjust left-to-right, and the sag is up and down. I'm giving them 5 stars for the benefit of the doubt, but would probably actually rate them 4.5 stars. Good value for money at less than $10/bracket.

Excellent well made easy to position speaker brachets work well on walls or ceilings. With every penny. One complaint, i would have preferred white over black.

I really do like these brackets. They are very well made and very sturdy, with a lot of adjustment possibilities but lacking in one adjustment. If you install these on the wall and want to point them down, they work will. I did that, but I also wanted to turn them inwards to face a little toward each other, and while I managed to achieve this, I had to get creative and swivel the speakers so that are no longer 'straight up and down', but more twisted a little, if that makes sense. I would buy them again for sure, but knowing that limitation is something I have to deal with. The finish is pretty good, they appear powdercoated and I suspect they will last well in the metal workshop I installed them in.

Solid mount. I've had RP-250S and RP- 500SA mounted on these and fits with no problems. The install is self explanatory and the provided hardware is enough to do the job. Small and unobtrusive. Great value for what's out there. Only gripe with the functionality is that I wish there was a swaying feature where it juts out of the wall, then it'll be perfect.

Nice solid looking mount. Had to spend a bit of time with adjustments to get my angles right but got it worked out. I mounted them opposite of how they're designed but it is how my install needed to be. After my modifications they perfect for my JBL garage speakers. Hooked up to a Fosi Bluetooth 2+1 amp (10" sub under my workbench) and everything sounds great.

Arrived quickly, Easy to install, doing a good job holding my speakers up under the eaves in my backyard without any issues.

Very nice mounts. Worked perfectly for my ceiling installation. If needed would buy again.

These mounts are very strong and solid at both the wall and speaker end. The tilt angle locks in place very nicely so I don't have to worry about the speakers tilting downwards over time (as is the case with many cheaper mounts). I am confident that the speakers won't fall off the wall, but there is an additional safety cable you can attach to be extra sure. Unfortunately they are useless at controlling the other tilt angles (both at the wall and speaker, but especially at the wall). On the speaker side's rotation adjustment, there is a set screw and a nut. The nut must be tightened before installing the bracket on the speaker, but if it comes loose, the set screw becomes useless at preventing the speaker from spinning, which becomes an issue if there is any imbalance in the speaker's center of mass. On the wall side, it's even worse. There is a nut holding the speaker in place and if the speaker is on the left, you can rely on the tension of the nut "tightening" from the speakers weight if you get it juuuust right. But if the speaker is on the right, the weight of the speaker will loosen the nut over time. This would be a 5 star product if it was possible to lock rotation of the 2 nuts.

Great mounts for my 10 lbs. Paradigm Titan book shelf speakers, as i am limited to room in my house and decided to hang speakers from the ceiling. I looked at many mounts , but these caught my eye just due to the design and construction of these brackets so had to try them, Great product in my books and has a safety cable incase of a detachment of mounts.

Son perfectas y de excelente calidad el material resistente

Llevan casi 3 años soportando pesadas bocinas BOSE de 6 unidades y son super discretas.

Super strong. Well built. Nice matte finish. Feels like quality and very suitable for heavier speakers. Great adjustability.

Not as strong than expected but it does the job.