Garbage fighter Tires for Series 500, 600, 700, 800 and 900, e5, e6, i7,Anti-Slip, Great Adhesion and Easy Assembly, Wheel Replacement for All roomba Models (Black 2 Pack)

These tires worked great as replacement on my older 900 series Roomba, which had worn down so smooth that the vacuum was having trouble with thresholds and docking. Directions for replacement were not very good, but looked up a video for tips on how to get the old worn down tires off- used a heat gun (or hair dryer) to warm the old tires up and make the adhesive loose, and used a small flathead screwdriver to gently peel them off. Took a bit of time, but then these new tires were easy to get on, and a perfect fit, and the old Roomba is working great again!

Very good quality when you need to replace the wheels on your Roomba! It is kinda of hard to get to the wheels to change them, but once it’s done they work really well and are the correct size needed. Good value for the money, and they’re not noisy.

These fit my series 600 roomba perfectly. I removed the wheel module, slipped a small flathead screwdriver under the old tread pulling up. The old tread is attached by little knobs inserted in the plastic. I just cut each knob as I got to it. Once the old tread was off, I soaked the new tread in hot water for a few minutes and it slipped right on. Only took about 20 mins total to do both wheels. Someone else wrote that tip in reviews and it worked perfectly!

Despite claims these are hard to install, it wasn't really difficult. The original tires were glued on, so I had to slip a small screwdriver between the tire and wheel to separate the glue, but the old tires then came right off. The new ones don't have glue but seem to stay on fine. They made a huge difference. See my review of the i7. With the new tires, it hardly every gets stuck any more, and seems to navigate much better. I suspect the Roomba counts wheel rotations to estimate positions and differential rotations to account for turning and moving in a different direction, and the old tires had lost most of their tread and were slipping a lot. I saw absolutely nothing in my research that said slipping tires might be the cause of many of the problems I was having, but I bought these because they were cheap and were the last thing I hadn't replaced. SCORE! The Roomba still has major software issues, like ignoring schedules for no apparent reason, losing contact with the WiFi access point that is in the same room about 20 feet away, and so on. The one software issue they seemed to have fixed is recognizing and refusing to charge 3rd party batteries. After a month of use, and about 3 days after I installed the new tires, it announced it was not going to charge my new battery and I should get an official iRobot battery. (So the new tires worked great for a couple of days, including a new mapping run and the first thorough cleaning in over a month.) I finally had time to re-install the original battery two days ago, and it charged up and worked fine. I wish I had tried the new tires FIRST!

Replaced my roombas old worn out tread with these. They fit perfectly

Gave new life to my daughters Roomba i7. Her "tires" had worn down so much that one had zero traction, and the BOT would turn in circles. The hardest part was taking off, and cleaning, the old rubber "tires." A sharp 1/4-inch chisel might have made it easier but all I had she had was a razor blade. the old tire was glued to the wheel so all I could do was cut it off a small section at a time and then, try to scrape off the residual glue and rubber material. Once done though the new rubber tires went on easily and work GREAT.

I've been having issues with my Roomba lately. From not wanting to dock properly, so not charging, to not wanting to empty. I've been cleaning it and replacing the basics to no avail. Then I realized how bad the tires were. I didn't want to waste money and all that unnecessary plastic to buy the entire units so I ordered these to give a go. Removing the old tires was a bit difficult and made me nervous. I did unscrew the main casing and unscrewed the wheel units from the Roomba to make access easier. My old wheels didn't seem to be glued on (if they did, the glue has long worn off) but did have nubs that pushed into holes in the wheel frame. I wedged a screwdriver under a loose part and just pulled and pulled. The nubs broke and stayed in the holes. I then pulled the new treads on. They were a bit tight and I had to slip a small screw driving under it to get it to align to the groove properly, but I only had to do that once and the remaining easily pushed into place. I put it back together and let it go. It is moving much faster and much better now thanks to the traction. It is docking with ease and matching up to the charging sensors and the emptying port. It also seems to be vacuuming much better. It's amazing how just the bad wheel treads have been causing me so many issues. I will update if I have any trouble in the future, but I'm extremely impressed. I can even move my base back onto a carpeted surface now because it was struggling to dock so badly I had to move it to my kitchen.

This is not a simple task for the average DIYer to remove old tires and replace with new. I have an older Roomba (983) from Costco and the tires were molded on to the Roomba's wheels. yes they do work but it will take you at least a couple hours to replace them. however they will work

These filters are the same as the ones you would find as original equipment except the price is much much much easier on the wallet. These hold up a long time and are quite sturdy. These are the first replacement filters for a machine I bought 5 to 7 years ago & the filters I’ve been using are finally starting to show their age, wear and tear but I could get another year out of them. The price is what motivated to buy these filters BEFORE the filters that came with the iRobot. Fits well, and the delivery didn’t take very long either !

El costo es accesible y fácil de usar.

Muy buen producto a muy buen precio

Budget solution for our roomba helper.

I like the product once I figured out how to put it together was very easy. I just wish they had a little bit of instructions or where to find the instructions to put it together. It took more time finding the instructions on how to put the wheels on then it did to actually do it