15 Amp 10" Portable Jobsite Table Saw with Folding Stand-TS6307-00

Good saw with plenty of power, especially when paired with a good blade. I've been able to get nice, accurate cuts and easily build a couple of things in the few short weeks I've owned this. Right out of the box everything was in true and I've not had to make any adjustments to the alignment. Additionally, I like the size and weight. I wavered between this and the Dewalt model (twice as much), but the Dewalt is appreciably bigger while this saw fits fairly well on a shelf in my garage. No issues with the sturdiness. It doesn't move or wobble when I use it but I can still lug it from one side of the garage to the other without throwing my back out. There are obviously bigger, better table saws out there, but for less than $350, this is a steal and fits the bill for 95% of the projects I'll need to do. You will probably want to upgrade the miter gauge asap to something better. The included miter gauge is just awful. The fence isn't all that much better, but isn't nearly as bad as the miter gauge.

Love this table saw! I was afraid the legs would be weak/shakey, but NOT SO. They are robust, well-designed, and fold/deploy easily. This saw comes assembled in the box (except for safety accessories and fence) and ready to go, although they suggest verifying - which I did - various parameters such as 0-degree and 45-degree stops (I adjusted the 45-degree only slightly). All accessories have a place on the folded saw, so you don't have to find a place to hide them in the workshop. The blade that comes with the saw is a 24-tooth, but despite that fact, it performed very smooth cuts in some drawer pieces I was sawing. I didn't take the time to hook up my vacuum to the saw, but used the 45-degree pipe extension that was included to direct dust/chips to a 5-gallon bucket, which caught about 70%. The vacuum would likely have caught 95% due to the enclosed design of the saw exhaust. I'm not big on safety guards (sorry) because they're usually restrictive and cumbersome. Not so with the Smart Guard System on this saw. Very easy to use; easy to set up; functions perfectly; does not impinge on feed. You can set up or take down this saw in 2 minutes or less. Oh, and the fence control is smooth and accurate! SOOOO easy to change and verify measurement for subsequent cuts. It's heavier than the saw I replaced, but the carry handle is convenient, and allows short distance carry even with all the accessories stowed. Haven't used the miter yet, but if it's slightly loose (as many are), that can be remedied if necessary with aluminum tape. Some folks complained of the noise of this saw, but I found it was no more noisy than my old model, and in fact probably quieter. (I've always used ear plugs AND muffs.) In short, you could spend more on a table saw, but I seriously doubt you would be any happier than with this one.

Iam a machinist and of coarse picky! This thing was all aligned nicely, smooth moving fence and blade adjustments, blade guard is sturdy but would rather it came with a zero clearance the a dado gap style. Yeah its loud, its a table saw! Lighter then it looks, easy to move with the handle and legs retracted, really easy to store. The miter guage isn't to great, like most. But ia. Happy with my purchase. It runs smooth cuts nicely even on hardwood.

I needed something for cutting acrylic sheets for display cases I'm making for Lego sets. Since purchasing cases is just a ridiculous expense, I figured it's cheaper to just make them. This arrived, but part was damaged in shipping, despite no damage to the box. But it must have shifted somehow, so one of the brackets on the auxiliary fence was bent, and it couldn't fold over into the out of the way position. I already had registered this for the warranty, so when I called, they asked for the part on the IPB in the manual, said OK, and three days later it is already out for delivery. The entire auxiliary fence piece, not just the one bent bracket. So their support is outstanding. This is a delight to work with. Setup is a breeze with the legs unfolding. I replaced the blade with one specifically designed for acrylic, and the performance has been outstanding. The options for adjustments are far more than I'll ever need. And the stability of the platform, despite being a portable one, is great. No movement once I start cutting, the table stays steady on these foldable legs. Even with the shop vac connected to the discharge, though, it's an absolute MESS of dust. I had to throw away the pair of pants I was wearing the first time I tried this out since it was just so covered with tiny plexiglass dust, there was no way it was ever going to come clean. I have some cardboard I've since placed around the legs to block it from getting everywhere, since most of the mess was coming from underneath, and that will help. I may end up looking at some of the youtube videos to create my own dust collection unit for the blade as well. Meanwhile I've purchased some wet gear to throw over my clothes like I'm going to go fishing, so any dust can be brushed off easily from the slick surface. But aside from that, the results are great. No problems moving things through the blade. I like the safety shutoff option so it won't come back on if power is interrupted and you don't have the material still being held. Not sure if the anti kickback tool would really help on acrylic either, but so far everything has moved through just smoothly. Got it on sale, so there is no way to possibly beat the value for the price.

easy to set up; functions perfectly; does not impinge on feed. You can set up or take down this saw in 2 minutes or less. Oh, and the fence control is smooth and accurate! SOOOO easy to change and verify measurement for subsequent cuts. It's heavier than the saw I replaced, but the carry handle is convenient, and allows short distance carry even with all the accessories stowed. Haven't used the miter yet, but if it's slightly loose (as many are), that can be remedied if necessary with aluminum tape. Some folks complained of the noise of this saw, but I found it was no more noisy than my old model, and in fact probably quieter. (I've always used ear plugs AND muffs.) In short, you could spend more on a table saw, but I seriously doubt you would be any happier than with this one.

This saw is the epitome of the phrase: "The squeeze is worth the juice!". Assembly is very straight forward. The 15amp motor is powerful. I'm 5'7 and find the height very comfortable and it fits in my smaller shop and is easy to use outside for projects. The legs need to be fully extended and nudged to ensure it is standing just right to ensure it is flat and stable. One leg is adjustable and I have not had any stability issues. Dust collection from the 2.5" port is great with a wet/dry vac and completely usable to direct dust into a 5 gal bucket if you don't have a vac. I found my blade at a near perfect 90 degrees right out of the box. Just about every setting was perfect out of the box. They make adjustments on this saw extremely easy. The fence is very easy to adjust. Blades are easy to adjust. I would recommend building a saw sled vs using the provided angle guide, upgrading the saw blades when able, and upgrading the saw fence so you can use feather boards or other attachments to add to the safety of this saw. Another upgrade would be a zero clearance plate. I have used this fairly regularly since I picked it up on sale and it's been worth every penny. Bonus points for the ability to rip 4x materials and the ability to put in a dado blade.

An extremely effective, portable table saw at a great price! Power is fantastic, couldn’t ask for more. I would say the saw is relatively cheaply made- but very well engineered and effective in a way that doesn’t negatively affect it. I’ll update the review if I run into problems. But so far, it’s super powerful, lightweight, takes up very little space in my garage all folded up with its awesome integrated legs. The fence works great. The gears that move it up and down are a little crunchy as others have mentioned but as long as it doesn’t give me issues I’ll look past that. I got this on sale for $280 and I think that I couldn’t ask for more value at that price point.

I did change the blade from 24 tooth rip , to a 120 tooth thin finishing blade... this saw is amazingly powerful and smooth cutting.... accuracy testing was very very good... the saw change wrenches that have their own storage... along with other accessories stowage, awsome... but only complaint would be to thicken up the wrenches a bit... they are a little rough on the hands...

天板がだれてハジの方で真っ直ぐじゃなかった。 ちょっと残念。 でも他は扱いやすくて良いとおもいます。 高い金払ったんで、楽しみながらやっていきます。

I just returned a new Ridgid 4518 because it was impossible to square and set up. It was very cheap material wise which really surprised me because I am a fan of Ridgid. Don't buy it. Save up until you can spare $200 more and buy this Skil. It is really amazing. Accurate and square right out of the box. The rack and pinion fence adjustment is so good. Truly a well engineered tool. Lots of power and finally a saw that controls the dust fairly well. I have a lot of confidence in the saw which is important when working with a tool of this nature. Highly recommend you get this tool in your shop.

Si bien la linea de herramientas skil es de entrada, esta sierra compite con marcas de mas prestigio. La sierra cuenta con una valla que se mueve con sistema tipo cremallera (rack and pinion) facilita mucho hacer ajustes milimétricos; ya no hay que dar golpecitos. Tiene buen sistema de colección de polvo y si se conecta a una aspiradora de 2hp es excelente pero si esta uno limitado, la sierra trae un codo que se puede poner en la salida del polvo y apuntar a una cubeta, en el caso de el motor no venga alineados con los canales de la mesa de la sierra tiene la capacidad de ajustarlo con un tornillo que viene el la parte inferior de la mesa( hay que leer el manual), la flecha donde va el disco corte es de 5/8 y puede utilizar juego de discos apilable hasta un 5/8 de ancho, puedes cortar una hoja de triplay a la mitad sin problema. El disco que trae de fabrica es regular, hay que comprarle discos de mejor calidad para sacar su potencial. Me gusto mucho que el disco lo puedes bajar y subir con mucha rapidez sin perder precisión. La mesa es de aluminio pero trae un acabado que hace que se sienta robusta, si no tienes donde ponerlas trae sus patas integradas pero para mi gusto esta un poco chaparra. En general es una buena sierra profesional a un precio accesible. Eso sí, me tardo 3 semanas en llegar xD.

Perfect size for hobbyists. Didn't want to lug around a frame and wheels. And the saw came zeroed on all adjustments. Great saw for the price. And customer service was fantastic at getting it to me when I needed it.

Other than the dewalt this is the best . Great power , clean evacuation with the chip tube . Smaller then the dewalt ( which is why I chose it - space reasons ) Table is not perfectly flat as others have mentioned , but for me its fine . Its loud , ya but its a table saw . Love it