Specialist ID Vertical Top Load Three Card Badge Holder - Hard Plastic with Heavy Duty Breakaway Lanyard w Quick Release Metal Clip & Key Ring (One Holder / 3 Cards Inside) (Black)

I was searching for a lanyard wallet and came across this company ID holder. It works great to put my drivers license and wallet cards in while hooked up to my pocket lanyard. It doesn’t break easy and can take a pull as it’s always in my back pocket.

This badge holder is solid, it keeps my School ID, and School Bus Driver ID Sec. badge safe, and working. The overall design is simple, and sleek. The slide buttons on the bottom corners on the black back side of the holder for easy removal of the cards is a super useful design. They are so well designed that they do not push my IDs out when I have the badge holder sandwiched between my coat, or hoodie and shirts. This holder does its job, and it does it right, nothing bad about it!

High quality

"I have to have a security card to get to my floor in the office tower. Unfortunately, with age and busy-ness of life, I constantly forget to bring my card to work. Or I would change my wallet/purse and forget to move my card with it. It was a major problem that I am constantly asking to borrow someone else's card. This badge holder solved my problem altogether. I put my security card in here, and hang the set with my car keys. Every morning I put the holder on my neck and go to work, and hang it back on the wall at home when I get home. Since getting this, I have not forgotten my security card even once. When I go buy coffee during the work day, I slip my credit card in the back so I don't need to bring my purse with me. It is ultra convenient. And if I ever put the badge holder in my purse, it has enough volume that it is easy to fish out. It is a quality product that has solved a big problem for me. I would recommend buying it." - Angela Chang "-got this to hold a new id/keycard that doesn't allow a punch hole anymore, might store business cards in extra slots. -there are two sliding buttons at the back that will push front, back or both card slots out. - you can store one card in the front and two on the back" - Smoothie "Works ok with a regular magnetic id or credit card size item. My badges for work is the size of a credit card, but the RFID chip makes them thicker. One side accepted it ok. The other side I really had to jam it in to get it only 2/3 of the way in. Then, I had to use pliers to get it back out. It seems kind of cheaply made, but I didn't returned it due to the problems above, so I can't say if it's durable." - D. Askov "This is an initial review since I have only had this badge holder for a couple weeks. However, liking it so far. Unlike many of the 3-badge holders I have had in the past, the cards lock in which reduces the possibility of the cards falling out. The interesting technology for holding and removing the cards from the holder is wonderful...I never feel like my ID cards will fall out. Overall, the holder seems high quality. After I use this for a time, I may revisit the review." - Michael S. Tucker "this item is just as described. Very sturdy build and the plastic feels like it's going to last quite a while. The lanyard itself is very tough as well. Tangle free probably due to its thickness. You can store 3 cards like it claims. There are two little push lever thingy's that push the cards out. One pushes two cards in the back out, the other one pushes the front card out (most likely your id badge). very easy access to cards. highly recommend this product. If you need a reel, you can remove the lanyard and attach a reel." - Y. Kim "Excellent concept. Perfect for multi badge environment. The tab idea for removing each badge from the holder is brilliant! Perfect for a Government office. Will update the review if I notice any flaws. The last few badge holders were also "perfect" right until the loop that held them to the lanyard broke. Most cases that was too soon." A guy who buys stuff "Love this! I really wanted it for the lanyard, not the holder. Didn't know they could be purchased separately. They lanyard rope is sturdy and adjustable. I already had a see thru 2 sided holder with a zip lock top. However, I am holding on to thexplain holder that came with this set just in case someone needs it or it comes in handy later." - Najsma1 "One thing the pictures don't quite portray is how big everything is. The strap is thick. We're talking as thick as pencil. The little hexagon thing is big and bulky, the snap release is oddly bigger then most similar releases. and the card holder itself is heavy. If you're looking for something small and discrete, this is not it. Otherwise, it holds up well and there is switches in the back that push up the cards for easy removal." - D. Avery "Awesome. Durable case. However, you cannot see the second and third card, only the first you can see. The necklace will pull apart at the attachment point if pulled hard enough. Not sure if this is for safety but I haven't had a problem with it coming undone unexpectantly" - Navy Sailor "Top quality ID holder. It has two separate compartments for two IDs. It has a sliding button on the back to lift and release your ID if you need it out quickly. The cord is well made as well as the snap clip the connects the ID holder to the cord. You can just click it off and it's separated. A must buy for people with multiple IDs." - Wolf Stark

6-month review. This little thing makes me happy every day. I tried a myriad of badge holders that all drove me batty. Honestly, if you only need to wear one card and never have to take it out of the holder, go with a thin, leather number. BUT if you need to take your card out constantly throughout the day to access different gates/doors/computers, this thing is a real frustration saver. Moreso if you have, say, 3 cards for 3 different levels/areas of access. Best part is single hand use. If you're at a door with a load in one arm, you can very easily retrieve a card from this holder with no eyes and one hand. Replacing it with one hand is a little more fiddly, but still very doable. The rope and all the clips and adapters it comes on are a bit clunky. I put mine on a simple ribbon lanyard and it's perfect.

I've been using this holder for about a month now, and it's working out great. It's lightweight, so it's comfortable around my neck all day. My cards are held in place well, and the slide buttons on the back make removal easy if needed. It also allows my door-entry card to scan without removing it, which is one feature I was looking for when I was shopping for a holder; it's especially helpful if your hands are full. I don't know how well it might hold up in an environment where it's beaten and banged on every day, but for the price it would be worth a try. It's great for an office environment such as the one in which I work. Overall, I'm very satisfied with this product!

works great, solid build

I will say that overall, I like this card/badge holder. It's very lightweight, easy to use, and very sturdy. I have been using it for the last 6 months without much issue until recently. There are two slots for the 3 card limit: The front slot, which has the clear plastic for one card, and the other back slot for two additional cards. The cards are released when the release button is slide for the appropriate slot (right button for the front, left button for the back). One word of caution: The secure hold of the back slot is dependent on the two cards being in at the same time. Once one is removed, the remaining card is very loose in its slot. It's so loose that I've had issues with the remaining card falling out. The last 3 days of trying to find where that remaining card slipped out to has been a pain, as I use the holder for work-related badges. Luckily I found the card, but like I said it took a while and found it just by chance in a drawer, off to the side. I had accepted the flaw for a while, as I usually saw the remaining card fall out and knew to pick it up right away. Unfortunately the latest incident has made me decide to purchase a different one with a spring to help hold any remaining card. I do recommend this if you are not removing the cards in the back slot too often or if they're easily replaceable, such as business cards, as it's inexpensive and sturdy. If you are using it for items like credit cards or identification, I would spend a little more money on an item with spring inside to secure those type of items.

Broke after using it for 2 months, not worth!

Questo porta badge è proprio quello che cercavo. Semplice e funzionale. La plastica utilizzata sembra di buona qualità ed il tutto è ben assemblato. Può essere utilizzato anche con un solo badge o due, in quanto nella parte parte posteriore ci sono due linguette flessibili che tengono fermi i badge contenuti all'interno. Il sistema di estrazione è semplice ed efficace, è composto da due levette indipendenti che estraggono il badge frontale o i badge posteriori. Consigliatissimo per chi deve portare fino a tre badge.

I like the fact it hold my 3 modes of transit cards. TTC, presto and bike share! With the tabs at the back they allow me to easily slide up the card I need and put it back again. The breakaway lanyard means I won’t hang myself passing through a turnstile! 😏

So far I am very impressed with my new ID card holder. It easily accepts three credit card sized IDs. They fit securely and when you need to remove them I love the two sliders on the back of the holder that you manoeuvre with your thumbs, which allow the cards to slide up a centimetre above the top of the holder so that you can pull them out. Left slider for the two ID’s in the back and right slider for the ID in the front. Genius! The price was more than what I would usually pay and with the additional shipping cost a single ID holder has cost me £10. But, it is exactly what I needed for work and so far it is doing a great job.

Als Flughafenmitarbeiter war ich auf der Suche nach einer Alternative für den billigen Ausweishalter, der öfters kaputt geht. Dieser Halter ist nahezu perfekt. Er ist robust, bietet Platz für bis zu 3 Karten, und es lässt sich schnell durch die Auswurfmechanik entnehmen (Airport Mitarbeiter wissen, warum er schnell entnehmbar sein muss....). Schlichtes schwarz, so wie es sein muss, vielleicht hätte man das Firmenlogo am Band sparen können, aber nicht schlimm.