T12 Soldering Station DIY STM32 V3.1S OLED Temperature Controller Electronic Welding Iron Tips Handle Aluminum Alloy Case Power Equipments 110V T12 Iron Tips K C1 JL02

Genuinely a very high quality soldering iron. I've used quite a few and this is the one I always come back to. Heats up in seconds, build quality is great, heat transfer and power is excellent, and generally just makes soldering a breeze. Tips are easy to swap out and adjust as they just slot in, and the iron itself is thin and light weight making it easy to use.

I bought this soldering because I saw several reviews on YT and was intrigued with its small size and quick heat up time. I did one of the suggested upgrades by soldering/connecting a ground wire to ground the metal case and have been using it with no problems. My only issue was from a couple of tips I bought that kept giving me error readings, but that wasn't from the station itself but from the tip.

Only dislike is doesn't come with power cord so I stole one from an old desk computer, and this might sound stupid, but I would like it better if the case was larger and a little heavier so it was more stable on the work bench.

This is an inexpensive, yet powerful soldering station. I've used this for thick and thin wires, and for surface mounted devices without it overheating the components because lower settings can be used and the unit has enough power to keep the tip at that temperature. I did use an external device to verify and calibrate the temperature and it is within a decent margin throughout the temperature range.

Pencil is super cheap... like a pen tube with some hardware attached. Electronics are loose inside the control unit. Nothing worked right... constant cycle through "error" and erroneous and wildly inaccurate temp readings. Did this with the pencil removed, to a lesser extent. Tried 6 tips between the two units and all resulted in the same behavior. Went through two units and neither worked. Didn't bother taking it apart to see if I can get it working because for $100 I shouldn't need to do that. Maybe if it was a $30 DIY project... but for $100 this thing is trash.

This iron heats up in 5 - 10seconds with full temperature in about 20 seconds 450deg. Shuts down in about 15 minutes no use and restarts when you touch the iron again. All of this is programmable. You can set alarms or turn them of, even set time and I think date--not sure why though. I think it is probably because it is driven by a high end PIC processor and simply available. Other irons look like it, stay with this brand and don't get the build it yourself; if something isn't right you are on your own.

Great unit for the amount of soldering I do.

I've built dozen's of keyboards with this now, both smd and through hole. Temperature is consistent enough, and honestly has never given me issues. Possibly one of the best value propositions available for soldering stations.

Si, es mucho mas caro que el cuatin de steren, home depot, etc. pero si usas el cautin 1 o 2 veces a la semana hasta dan ganas de usarlo todos los dias. Se calienta super rapido y puedes cambiar las puntas (si tienes algo para tocarlas calientes) demaciado rapido y las partes para repararlo en caso de que falle algo en el futuro son faciles de conseguir. Lo unico malo es que no viene con un cable para conectarlo a la luz y si no te sobran de esas en casa tendras que comprar uno o tomarlo prestado de algun aparato.