FLEXISPOT EN1 One-Piece Standing Desk, Electric Adjustable with 4 Memory Presets, 176 LBS Capacity, Stable & Quiet, Seamless Desktop for Home Office & Dual Monitors, 55"x28" Mahogany

I've used high-end electric desks at work, and since you typically get what you pay for, I was a bit wary of buying one for home that was so relatively inexpensive. But overall the reviews were positive enough (especially regarding customer service) and there were some good tips regarding assembly, so I figured it was worth the risk. Both boxes arrived with the contents in perfect condition: the boxes used very thick, heavy cardboard, and the corner protectors on the desktop were made of a very dense rubber. I've unpacked a lot of furniture (assembling desks for classrooms and computer labs), and the packaging for this desk puts many so-called "commercial" products to shame. Any damage that might occur would be due to careless shipping and handling - not how the factory packed it. Assembling the desk was straightforward enough, although I've put together enough of this sort of furniture over the years that there weren't any surprises. Just take your time, follow the steps, and you'll be fine. This can be assembled by one person, but a second set of hands will make things easier. All of the pre-drilled holes lined up where they were supposed to. One assembly tip: line up one of the end holes in a leg with its corresponding hole in the desktop, and drop a thin nail into the hole to give it something to pivot around. Then with that hole aligned, line up each of the other holes, again dropping a thin nail into each one until they're all aligned. Then drive the screws, replacing each nail, one at a time. No guesswork, no misaligned screws, no do-overs. The only two pilot holes I had to add were for the center crossbar, so you will need a drill and a small bit (a hand drill or pin vise would work for this). For driving all of the screws I used a hand screwdriver, so I wouldn't run the risk of stripping out the particle board. Everything went together very nicely. There were no stripped threads or alignment issues. Overall, I felt the quality of the desk and and the fit and finish of the parts were excellent and exceeded my expectations. The motor operates pretty quietly, and raises and lowers the desk just fine, even with a bunch of stuff piled on top of it (I don't plan on testing what its limits are - it holds what I need). I had an error message pop up on the controller once when I attempted to recall a saved height, but unplugging the desk from power and reconnecting it resolved that. No issues since. The desk is solid and stable. At its higher settings it will sway a little bit when leaned on, but that's just physics at work - if you need something that's really solid at full height, get something with four legs instead of two. The only (minor) gripe that I have is that the cords could be a bit longer: the one for the control panel so you could reposition it if you needed to; and the power cord which barely reaches the width of the desk. I'm very pleased with this purchase. It met my budget, and exceeded my expectations. It's a good-looking, solid, quality desk. Hopefully it'll hold up over time - but so far, so good!

Great product! Not too difficult to assemble, but is very heavy. Works superb and is very sturdy, even with the 2 double monitors and stand. Enough room for my lamp, speakers and workspace! Have had this desk for a couple of years now and it still works like new! I am 5'7" and it's highest rise level fits me perfect! Trim of desk where I sit shows NO wear where my forearms rest, so it still looks like new! Very happy about that! Highly recommend!

I just put this desk together today. The quality is great for this price point. It took me about 45 mins to put it together by myself. The instructions were thorough and correct. I screwed up one thing on my own because I didn't look at the illustrations as carefully as I should have. I had someone else help me flip it over and move it to it's location and I added my computer accessories. The motor is very quiet. The presets are awesome. You can just hit the "sit" key and the table adjusts to your preset height... and then the "stand" key and it moves to that preset height. Just one push of the button. The table is VERY stable and looks great in my business. The packaging was perfect even though the box was torn up when I received it. No damage or scratches. Overall great buy!

The FLEXISPOT EN1 Standing Desk offers excellent value for its price — it’s sturdy, smooth to adjust, and provides plenty of workspace without taking up too much room. The motor is quiet and reliable, making it easy to switch between sitting and standing throughout the day. Assembly is generally straightforward, but one minor issue I ran into was aligning the holes for the leg brackets. It can be difficult to see if they’re perfectly lined up, due to the black gaskets to sink the screws into which makes that step a bit frustrating. Once everything is in place, though, the desk feels solid and stable. Overall, this is a great desk for anyone looking to upgrade to a sit-stand setup — just be prepared to spend a little extra time during assembly to get those brackets positioned correctly.

I've had the desk up for about 1 week now. Seems sturdy and works well. Was easy to put together. The seller was very responsive concerning some shipping damage and resolved my issue quickly. This is the perfect table for my laser engraver...I raise it and stand or lower it and sit. I am very pleased with this so far.

I'll make sure to update this if things change. I'm pretty demanding when it comes to the basics, and I've written reviews that call out deficiencies and defects. What a great desk. The instructions were very clear - just pay close attention to the diagrams. The hardware and the parts are top notch; the threading the screws, the quality and the fits of the parts is one of the best I've encountered, and I've put a bunch of stuff together. I've provided photos of the assembly process. Very, very easy, even if you're alone. I would recommend a cordless drill/screwdriver, but not necessary. The buttons on the control panel are very easy to set. Two comments: 1- I wish it had a small drawer, and 2- my only long-term concern is the motor. It is very small, yet it does have some heft to it. I just wonder if it will burn out over prolonged use - time will tell. Very pleased with this purchase.

i will say it’s very risky to buy this other reviews that are 1 star are saying the desk comes in damaged. mine luckily only had a scratch no real cracks or damage. the motor works normally. and the desk is very durable especially for my carpet. all around it’s worth it for your money 100% there is desks like this exact one but 700$ with upgraded firmware on the motor. but if you know how to build. this desk is amazing. after i mount my keyboard and mic this will be almost my dream setup

in late 2023, I slipped on black ice and fell, breaking my femur and after recovering, realized I needed a way to be at the computer and stand periodically to one, stretch my legs, and two, standing is preferable to just sitting and thus realized a standing desk may be what the doctor ordered. Had been thinking of getting one for a while but they were usually quite expensive but at some point discovered Flexispot and a bunch of desks here on Amazon, most running $300 or less for something roughly 45-55 inches wide. Some looked cheap, others nicely made, even if a single motor base. Turns out Flexispot has an Amazon store and bought this desk on sale. Read reviews of Flexispot and most were positive. With the exception of the L shaped desk (of which I was considering) that had a 2 piece top, the rest were single piece but in the end, ended up with the EN1, black base/mahogany chipboard top to replace my aging IKEA fixed height desk I'd purchased some 20 years ago that is hollow core inside and without a center support had begun to sag, especially with a keyboard drawer hanging underneath. Assembly was straight forward and utilized my drill to put it together as I had the proper bits to utilize the allan key screws and that made it even easier to put together by myself. It's a solid, heavy-ish desk, but it's a single motor base but it raises and lowers nicely, once I get all the cables so they don't catch in the raising of the desk for standing as one speaker cable got caught and fell on the floor. I now have a sling to house cables and surge protector so all can move up/down as needed. The size, 55x28 is a bit bigger than the old desk and with the support beam holding the 2 legs together, it's a solid piece and even when at full height, it's still fairly solid but likely more so when on the floor, rather than carpeting. I plan on getting articulating arms for the monitors as at the moment, am using the shelf from the old desk to hold the monitors until I can obtain the clamp on arms. even it is sagging a touch for the same reason. Setting the sit/stand positions was easy, just put it where you want it, and press/hold the sit button for instance for 5 seconds, and it's set, how much easier can it be? I still have 2 other settings to use and two manual up/down buttons and display. Turns out, the 28.2 was close to where I needed for sitting. I still need a keyboard tray and may make slight adjustments there and in standing mode, which is 44 something inches. This particular base runs from roughly 28.1 to I think 48". Not bad. Some bases do go lower for little kids to use as necessary and likely a bit taller for taller folks but for me at 5'10", it's fine as is. While at it, I did rearrange my office so the desk now faces the window. Room is on the small size, but it now feels a bit larger than it is.

Me gusto mucho mi nueva estacion de trabajo, es muy facil armarlo, solo asegurate de leer bien las intrucciones, trae las herramientas asi que solo te preocupas por seguir las intrucciones. Me encanto!

As an avid gamer, I have been on the lookout for a desk that can enhance my gaming experience and provide the flexibility I need for extended gaming sessions. After using the FLEXISPOT 55 x 28 Inches Electric Stand Up Desk for Gaming, I can confidently say that it has exceeded my expectations in terms of functionality, design, and overall gaming performance. First and foremost, the electric height adjustment feature of this desk is a game-changer. With just a push of a button, I can effortlessly switch between sitting and standing positions, allowing me to find the optimal gaming posture for different gaming scenarios. This flexibility not only enhances comfort but also reduces the strain on my back and neck, especially during long gaming sessions. It's a refreshing change that keeps me engaged and focused on the game at hand. The spacious work surface of the FLEXISPOT desk is perfect for gaming setups. Measuring 55 x 28 inches, it provides ample room for multiple monitors, gaming peripherals, and other accessories. Whether I'm engaging in intense FPS battles or immersing myself in open-world adventures, I never feel limited by the desk's size. The sturdy desktop ensures stability, even when I'm executing fast and precise mouse movements or typing with enthusiasm. The build quality of the FLEXISPOT desk is impressive. It features a solid and durable construction that can withstand the rigors of gaming. The desk remains stable, even during intense moments that involve enthusiastic movements. The attention to detail and high-quality materials used instill confidence in the desk's long-term reliability, ensuring that it can handle the demands of an avid gamer. The assembly process of the FLEXISPOT desk is straightforward. The instructions provided are clear and easy to follow, and all necessary hardware is included. Within no time, I had my gaming desk ready to elevate my gaming experience. That being said, DO be prepared and have a drill handy. You will need to drill screws into the desk. Or at least I did. In conclusion, the FLEXISPOT 55 x 28 Inches Electric Stand Up Desk for Gaming is a fantastic investment for any gaming enthusiast. Its electric height adjustment, spacious work surface, and sturdy build quality make it an ideal gaming companion. With this desk, you can enhance your gaming performance, improve comfort, and create a gaming setup that reflects your passion for gaming. FLEXISPOT has truly delivered a desk that meets the needs of gamers, and I highly recommend it for anyone looking to take their gaming experience to the next level.

So glad I got this. It’s really sturdy material, works perfectly and was relatively easy to install but I would recommend you have a drill..

its 5 star desk, but I give 4 because there is no English instruction only Chinese. Hard to assemble but at the end good product.

Absolutely excellent desk for productivity! The build quality is very strong and premiu feels sturdy and stable even at full height. The size (140×70 cm) is perfect for working comfortably with a laptop, monitor, and other essentials. Setup was surprisingly easy and quick, even for beginners. The motor works smoothly and quietly, making height adjustments effortless throughout the day. It really helps improve posture and keeps me active while working. Overall, this is a very high-quality, reliable, and user-friendly standing desk. Highly recommended for anyone looking to upgrade their workspace!