Vogel's Sound 3200 Speaker Wall Mount | Max. 11 lbs (5 kg) | Tiltable -30º/+30º | Swivels up to 70º (Left/Right) | Also fits Denon Home 150 | White | 1 Mount

Very-VERY heavy duty & versatile mounts with good wire management. I’m actually impressed with the quality but sadly I’m returning them for a couple reasons. First, they are not inconspicuous by any means and therefore didn’t meet with spousal approval. Secondly, the way they clamp to hold the speakers should work well for most speakers but I was concerned about them possibly damaging my speaker grills. I didn’t consider that the images shows speakers mounted without grills. I could have removed my grills but then I was loosing the subtlety of the speakers melting into the room decor. Really liked the 90 degree swivel so they can be mounted on the side walls and swung in towards the room. I’d highly recommend these mounts to 95% of buyers. They are way better than options that are half the price, but just wouldn’t work well in my room.

These speaker mounts are worth the money, I just replaced another cheaper brand that I bought less than a year ago because the speakers were too heavy for the other mount even though it was within the max weight limit of the mount. These Vogel's are great, but could use better instructions. The instructions are like those you get with an iKea product, just pictures no words. Other than that it is very sturdy, strong and can actually hold almost a 50 lb speaker (44 lbs to be exact) and they look classy. I recommend Vogel's speaker mount if you want a really good speaker mount that will protect your speaker investment.

A previous review mentioned that the back screws on the back clamp are unprotected. They include a set of 6 thin strips that can be placed over the screw entry hole behind the speaker for extra grippage but actually can double as a guard against putting a dent in your speaker. I did not need to use the screws since my speakers are 7lbs a piece but for heavier ones I would suggest using those strips directly over the screws. They will stick to the mount well enough and if you wanted a drop or two of Locktite will secure them in place indefinitely. Speaking of grippage, its pretty good but depending on the speaker some have fancy wood bases 1/4in below the main speaker like mine so the clamps are not perfectly seated against the bottom of the speaker. For this case I have the base on the back of the mount and the front angled slightly higher but high enough to clamp onto the lower front of the speaker with the grill in place for extra support. Since they are lightweight it is not an issue nor does it damage the speakers. Swivel ability is determined by how far back the back clamp is placed. You can extend it as you need but be wary of doing so with very large heavy speakers. Assembly took an hour for the first one as the instructions are garbage and the screws really, REALLY SUCK. Part near stripped the screws after drilling pilot holes into studs. They should have included the type of drill bit needed for the pilots as one too small will have you cussing out your walls and these mounts. Buy GRK #8 and use a 1/4in or 4mm drill bit first you will have a good time and take about 10 mins to attach the base to the wall. The mount is great so far and I had no issues with the parts missing holes or threads for screws. Make sure you properly and thoroughly inspect EACH piece in the box before assembly to be sure that all the holes and pieces are there and machined correctly, if missing something send it back and contact the seller for a replacement. These mounts are expensive as hell but I reckon you are paying more for the convenience of not putting holes in new $400 speakers.

I have a very heavy Center Channel Speaker mounted above my 120 inch screen. Because of the height, I needed to put it on quite a tilt down. I found these brackets, and I used two of them to securely mount my Center channel speaker on the wall. It's rock solid. The bracket is heavy duty and provided me the the adjustment I needed to tilt the speaker down at that odd angle.

I read a lot of the reviews before I purchased these, and I am very happy with the quality and sturdiness. Assembly was a little more involved than I was expecting (took almost an hour to complete both mounts) but the results are spot on.

First off, it’s kind of ugly. It’s got a dated style (2006 plastic A/V chic) that’ll contrast with most equipment. The least they could do is omit their ugly logo… Compatibility is so so. I had to cut a section of the plastic rear holder so I could fit my Sony core series center channel. Fit and finish is lacking as well. There’s so much slop in the main mount that your speaker will always lean to one side noticeably. There is also NO way to lock side to side rotation so make sure your mount is level. Tilt is adjusted with an inconveniently placed grub screw. A template with somewhere to place a level would have been nice. Instructions are ok. It’s got IKEA-style all language, no written instruction steps with only pictures. Coming back for an edit: I almost just dropped my Q6 meta because of this horribly designed mount. I was doing my monthly leveling attempt (because it sags to one side more over time) and the grub screw that holds the front arm in place came loose (maybe vibration). The arm then shot out leaving my Q6 un-supported. Thank god I had a hand supporting the speaker or this thing would have cost me almost 800 bucks. Seriously, make your own. Whatever you come up with will be better, cheaper, and more intelligently designed than this. I’d give it zero stars if they let me.

Acabo de montar los traseros de Logitech z906 y necesitaba los soportes adecuados. Aproveche una oferta en reacondicionados por un gran precio y la instalación ha quedado perfecta. Queda muy profesional. Hay que reconocer la calidad incluso de tornilleria y tacos fischer. Preferí está versión de soportes vogel a la otra de plástico negra ya que no me daba seguridad ni en la pieza trasera ni el conjunto en general. La pieza trasera para el altavoz está genial para el tamaño de estos altavoces. Tornilleria compatible con los Logitech, con 3 largos diferentes, osea que de sobra.

This bracket model quite sturdy with extension just nice to fit my KEF wireless speaker LS50 II. It sits quite well. Compare to another different model bracket, .... this one fits and seats just fine.

Polecam super wykonane i masywne

Was looking for some mounts for my studio monitor speakers, and came across these. Most others rely on drywall mounting w/anchors, which I wasn't sure I was ready to trust. These mounts are designed specifically for stud mounting, which was exactly what I wanted. These things are built so well. Not even the slightest bit of concern with these mounts supporting my Yamaha HS7 speakers, which weigh in at a hair under 20lbs each. Installation was a breeze...although it would be nice if they had some words to guide you along instead of just pictures.

Support bien conçu et qui fait le job. Facile à placer et à ajuster. Fabrication sérieuse.