Aluminum M.2 NVME SSD Enclosure, USB 3.1 Gen 2 to NGFF NVME PCI-E M-Key Solid State Drive External Enclosure, With Type C-C Cable, Black

Bought this enclosure to migrate Windows 10 on my PC to a new boot drive using Clonezilla (other migration software will also work). Installing my new NVMe drive (a WD SN850) in the enclosure was very easy, all screws and even a small screwdriver is included with the enclosure. Plugged it in to a USB-C port in Windows and I could see the drive right away. When booting in to CloneZilla to do the migration the drive kept getting write timeouts, as a test I moved the drive from the front USB-C port on my PC to a "normal" USB port at the back of my PC using the included USB-C -> USB3 port adapter. This time it worked flawlessly and was quite fast. I doubt this is an issue with the drive and more likely an issue with the drivers for the much newer USB-C chipset in Clonezilla. Adding that here as it may be useful to someone, try a normal USB port if USB-C gives you issues!

NVMe, not NGFF. Who knew there was a difference? (Not me!) Having bought 2 NGFF adapters, I discovered that M.2 SSDs are not all the same. I also discovered that NGFF adapters are often under a tenner, but NVMe adapters (or enclosures) are thirty quid. Great. Anyway, I needed NVMe, so I bought the cheapest I could find: this Aimos unit. Although cheaper, it has a pukka alluminium body. The 'brass' retaining/spacer screw is fixed so you don't have to fiddle, unlike the ultra-cheap NGFF jobbies. You even get an Aimos standard USB-to-USB3 titchy adapter, which must be essential for most of us, plus the dinky USB3 lead. The only negative for me is that it's difficult to see the activity light 'cos it's tiny and recessed. That said, it's the smallest negative detail. It worked right out the box, included the USB adapter I needed, and has an activity light. I am very pleased with this. EDIT: After a couple of weeks, I have deducted one star: sometimes the drive can take a very long time to get recoginised in Windows (10 or 15 minutes). Then it takes as long again after selecting a folder. It seems that having the USB3 plug one particular way up is preferable, though I have no idea why. (Also, running the USB3-to-USB standard adapter seems to mitigate this problem slightly; plus it's easy to see which way up the USB3 plug is - we put a small mark on ours.) Still, it works fine with this work around, so four stars seems okay.

Very disappointed with the speed. I was expecting a faster device. Easy to install & use.

Un peu cher, mais fait le job. (bon boîtier, sentiment de robustesse). Fonctionne bien si branché directement sur de l'USB-C. En revanche, l'adaptateur USB A. vers USB C ne fonctionne pas du tout, ce qui m'a considérablement ralenti dans mon utilisation du boîtier (le temps de trouver un ordinateur avec une prise USBC pour confirmer que ça marchait, puis de dégotter un câble USBA/USBC). C'est dommage de mettre quasiment 30 euros sur la table pour un simple boîtier, et de devoir galérer autant pour le faire marcher.

alles bestens zu empfehlen

Forse hanno migliorato il supporto agli adattatori USB nel software Samsung, ma al contrario di quello che è scritto negli avvertimenti della custodia, quando ci ho installato un Samsung 970 EVO per clonare il mio disco C: della Hynix, lo ha correttamente riconosciuto e clonato. Non ho dovuto quindi ricorrere ad altri software di terze parti. (ci ha messo 6:30 ore per clonare il mio disco C: da 256 Gb pieno fino a 210 Gb ma l'avevo attaccato ad una USB 2.0 e non ad una 3.1). Per il resto facilissimo il montaggio e molto bello da vedere. Montata la scheda NVMe balla un po' assieme all'adattatore, forse hanno preferito stare un po' larghi con le misure per non avere problemi con i vari produttori, ma niente di problematico, il cavo USB-C entra benissimo e lo si può lasciare a penzoloni dal case se non si ha un appoggio, non si sfila.

منتج رائع و محترم يعيبه البراغي التي تربط الهارد ضعيفة لكن المنتج رائع بشكل خيالي

Corrispondente alla descrizione, prodotto ok