PVC Stitch Liquid Patch – Air Mattress Patch Kit Heavy Duty, Inflatable Patch Glue for PVC & PU, Inflatable Boats, Rafts, Kayaks, SUP, Hot Tubs, Waterbeds, Bounce Houses. Waterproof, 3-hr Cure, 20 ml

It works very well; I was able to seal the inflatable mattress. You should use gloves, but be careful because some, like nitrile gloves, melt.

This stuff is awesome!! Worked perfect in my son’s inflatable bounce house that had a tear, and has been holding for days not and he’s not gentle! Glad I have this for any other holes that may appear.

So simple to use just apply a blot and leave it for two hours and it’s as good as new. I applied to to a few spots and the first application didn’t take for one of them because of an air bubble so make sure it’s air tight when you suck the air out but I applied another dab and it worked just great so even if for some reason you get a hole in your patch you can just patch up over that one! Great stuff. Would but again!

This works perfectly for sealing holes. I used it on a Coleman air mattress I bought used. It had 2 puncture marks on the top and a matching set on the bottom. Multiple layers of duct tape didn’t work, so I tried this. Because the holes were on both sides, I had to do them one side at a time. It is easy to apply and took only a few hours to dry, so I was able to complete both sides in a day. I inflated the mattress and even had my adult son (about 200 pounds )hang out on it for a while watching tv. No leaks. I left it aired up for 3-4 days and my dogs jumped on it and slept on it, still no leaks. I think it’s ready for our next camping trip. Some have said that it dried up after the first use, and I have noticed that the cap isn’t completely secure, so I put a small square of tin foil on the top before screwing the lid on. Hopefully that will help, but I guess we’ll see.

Great PVC glue to fix boats and rafts. This glue fixed my inflatable paddleboard that needs 15 psi. I globbed some glue on it and let it sit overnight even though it says it can cure in a few hours. The leak was a small 1cm crack thay was a slow leak, not a full slice into the side. Blew it up to 10+psi and no leak! The repair seem flexible and hopefully will hold up. I also used it to repair an inflatable raft that only needs 1 psi. Im sure it will work on the low pressure raft but I havent inflated that one yet. The previous sticky patch I tried on the hole didn't hold so it needed this stronger flexible PVC glue. It was also about a 1cm long hole in the raft. Im keeping it in the freezer to keep it supple so I can use it again. But for the price, it's worth even just one fix and I already got two out it. Great value fir the money. I included a pic to see the crack versus the size of the tube of glue.

I’ve always used traditional patches to fix punctures in vinyl air mattresses, and they usually work—unless the damage is on a seam. Seam repairs often fail unless you patch from both sides, which means making the hole bigger and still not guaranteeing an airtight seal. When our air mattress developed a ¼‑inch seam tear, I knew a normal patch wasn’t going to cut it. After seeing the positive reviews for this product, I decided to give it a try, and I’m glad I did. After several weeks of frequent use, the repair is still holding perfectly. Application is extremely simple. Just apply a small amount of the liquid patch over the seam or hole and let it cure. It sets enough in about 2 hours, and I believe it reaches full cure around 12 hours. The glue goes on thick but then levels out to a thin layer on its own, drying into a clear, flexible patch that blends in well. For seam tears or areas where a traditional patch won’t stay sealed, this product is a fantastic solution. It saved our air mattress, and I highly recommend it to anyone dealing with seam separations or tricky punctures.

Didn’t work !! When used for the first time seems like is only air inside the tube. I tried 3 different times but didn’t work. I fallowed the instructions and nothing. I am really sad because is not cheap product!!

Bought this to repair 2 airbeds that had small leaks on the seams--the first hole was about 1/8" and the other was about 1/4". Followed the directions--clean area, apply glue, let sit for 24 hours. Used the airbed with the larger leak, and it began leaking again the first night. Switched it out for the airbed with the smaller leak and it was fine for the 1st and 2nd night, it began leaking again on the 3rd night. Not really worth the money if the repairs only last a day or two.

رائع بصراحة ، وهو سائل كثيراً لذلك لابد أن تضعه على شكل طبقات متفرقة في الوقت ، بمعنى كل ساعتين تضع كمية خفيفة وهكذا عدة مرات حتى تتشكل رقعة صلبة، لانك لو وضعت كمية كبيرة مرة واحدة فسوف تنسكب المادة لانها سائلة جدا، لذا فإن وضعها بكميات بسيطة بشكل متكرر هو ما يضمن تشكل رقعة متينة وقوية

So far it’s work, no complaints about it

Todo muy bien

Used this product to repair a number of air leaks in my ageing Stand Up Paddle Board that were unable to be repaired with patches. So far, the repairs seem to be holding up which is a big result as otherwise, the SUP was destined for the tip!

ممتاز جدا جربته على مرقد الهواء ثابت وغطى القطع بس لازم تتبعون التعليمات بالضبط علشان يكون نتيجته ثابته