uxcell Forstner Drill Bits 26mm, Tungsten Carbide Wood Hole Saw Auger Opener, Woodworking Hinge Hole Drilling Boring Bit Cutter (Blue, Gray)

Description

Product description Product Information Made from cemented carbide (tungsten carbide) blade and being hardened and tempered. Featured with sharp edge, accurate positioning, high hardness, impact resistance, smooth cutting, high toughness. For drilling flat bottom holes with no chippings in any thickness of soft wood. For drilling holes in any direction and making arched openings. For drilling partially overlapped flat bottom holes for easy mortising. Drilling diameter < 40mm, maximum speed: 2000rpm; Drilling diameter ≥ 40mm, maximum speed: 1200rpm. Used on desktop (fixed) equipment, and can NOT be used on handheld power tools (such as hand drill or electric drill). The product is only suitable for processing wood or soft non-metallic materials. Processing metal and non-ferrous materials, the tool will be damaged quickly. Wide Applications Suitable for cutting holes onto any wood and wood products. Can easily enlarge existing holes and bore any arc of a circle. Drills flat bottom holes, pocket holes, and overlapping holes. Great for boring concealed hinges and door locks. The cemented carbide tip is designed to cut through hole cleanly. Can be used for wood products perforation, mounted spherical door shoot tip, drawer, plastic and wood products, plywood, etc.. Suitable for bench drill, vertical drilling machine, CNC carving machine, etc. The bit in the positioning is required to very low speed, and then gradually accelerate after complete position. Add water for lubrication and temperature reduction when drilling. Two Spurs & Center Spur Two spurs and centering point can offer repeated, clean and accurate cutting holes. The sharp center spur accurately locates the center of your hole. Special Design Small incision resistance to improve the opening speed. The head adopts arc curve design for easy chip-removal and no tremor. The perforation is neat, smooth, no broken edge. Universal Shank Round shank is made of solid hardened steel, with high hardness. Can be used in drill press, bench drill, vertical drilling machine, CNC carving machine. Tips Processing hardwood or other hard materials should be injected with water to improve the quality and accuracy of drilling, and extend the life of the hole opener. The tool edge and tip should be sharpened in time if they are worn or damaged, or the tool will be damaged quickly. Can not drill metal and non-ferrous metal, otherwise the hole opener will be damaged quickly. The cutting material must be fixed, and the drill bit should be perpendicular to the material. It will damage the tool or the material if the cutting material moves during the drilling process. Review: Good. - Worked well for the cabinet project I was doing. Review: Smooth boring bit - Very good drill bit. I got it for drilling into automotive plastics. It cuts a clean hole quickly.