KELTEC 380RB P32/P3AT BLT Clip BLRH

Worked for me and my LCP. It was about half a hole off as received. I used channel locks and a crescent wrench to bend it out and back in, test fitting as I went. My pin went out just fine. I knocked it out from the right side. I stuck the new pin in and hammered her home, and did notice a small sliver of cut plastic come out of the frame. The clip does come in contact with my trigger finger. The pin on the inside slightly sticking out does come in contact with my knuckle. At the house, I thought it would be an issue at the firing range, and planned to dremel it out, or get a hogue grip. I didn’t need to. I took the little LCP to the range and shot about 30 rds through it with a firm grip. It caused no issue at all, and I kind of forgot it was there. The screw did not back out after shooting, like I had happen with a s&w bodyguard. This clip is very strong and sturdy feeling. I did not have to soak my pin, or do any drilling, and I don’t recommend doing either of those. I can’t speak to how tight my original pin will be after the small sliver of plastic was take out of the frame. The clip is high quality. It was worth it for me to save a few bucks and bend it myself, but if you’re not too handy, it would be easier and less risky to buy the LCP one. I would buy again.

This belt clip fits the Kel-Tec P3AT perfectly and install took about 30 seconds. The belt clip is sturdy enough to clip right to a waistband for IWB (inside waistband) carry or to a pocket. And, of course, the P3AT is so small and light you likely will forget it's even there. Makes for a great carry option when wearing light clothing. Simple and effective. I really like this combination of the belt clip with the P3AT when carrying something larger isn't feasible.

This clip is very easy to install and it works very well. I use it for clipping the pistol in my western boots (boots must have stiff sides) and inside the interior breast pocket of my leather jacket. You do not notice it's there when handling the firearm if you are right handed. This clip is not reversible. Also, when I clip my pistol in my jacket breast pocket I have to put it in the right pocket and draw it left handed. I am right handed. If this is your plan for this clip and you are right handed you should know this up front. I haven't tried the clip by slipping the gun inside the waist of my jeans like some people do. I think IWB carry is uncomfortable and especially with an unholstered pistol, like a Kel Tec and this clip. Overall this is a great value and a great idea. Just know that there are limitations

Pretty good. The pin on my new production P32 was in there HARD and it took a BIG hammer to beat out the old pin and hammer the new one in. Installs pretty easy other than that. The clip fits nicely on a pair of jogging shorts, I bought it to use my P32 as a dedicated workout gun. No belt needed and just the drawstring provides plenty of retention while the clip makes sure it doesn’t fall out your drawers when your running and stuff. The clip seems a little easy to bend around, it takes a “set” fairly easily. Overall seems solid enough for the intended job and works nicely for gym shorts.

Works great

Works great. Elliminates the need of a holster.

I bought this for my Ruger LCP since several reviewers reported being able to make it fit with minor bending. I simply can't understand WHY someone would pay $30 for the LCP-specific clip when this one is $10! I watched a couple videos on YouTube and saw that, yes, only very minor bending is required. Some YouTube reviewers drilled out the pin while a little to 5/32". This concerned me since who's to say I might not want to take the clip off at some point? If it's enlarged them the original pin well just fall out... I took a chance and ordered this anyway. Once I received it I punched out the original pin and measured it with a digital caliper. I then measured the new pin and saw it's exactly the same diameter! No drilling required! I went ahead and made the small but necessary bends on the clip itself until the hole lined up and the bends were flush against the pistol frame. A few taps with a hammer and the new pin went in. Screwed the screw in and the clip fits perfectly! The pistol qualifies as comfortable deep concealment now with no obvious IWB holster clips. I can wear this with a shirt tucked in with nothing visible. Same for summertime shorts and t-shirts. AWESOME! I ordered a trigger stop as well to give a little extra insurance against accidental discharges since I carry with one in the tube. All things said, forget about the ridiculously overpriced LCP-specific clip for $30! This Kel-tec clip us an absolute no-brainer! I'm a VERY happy and satisfied customer!

Installation takes 5 minutes if even that and it arrives in a sealed branded keltec retail plastic bag ready for shelves at your local sporting goods store. Easy purchase… got it fast with free shipping and didn’t need to spend time going into town for the exact same product. Would buy again from this seller if I ever needed another.