FJNATINH 30cc Needle Tip Glue Squeeze Bottle, Precision Tips Applicator Bottles, 5 Pack

These bottles work great for putting a burnishing product like Tokonole, or gum trag, on the edges of leather projects. The needles flow smoothly and hold plenty of fluid. They are not flimsy and allow for excellent control over how much product is applied. I give it five stars for quality, ease of use and versatility. It is a great value for the money.

I used this to glue RC car tires, this made it easy and left no mess. Much cheaper than hobby shop glue tools.

I got these to do some minor repairs on a guitar. I needed to get glue into some small crevices and these work very well. Some people have complained that you can use the tips once you used them because the glue dries inside. That's true, but it's hardly a fault of the product. It's what happens when you leave glue in a small needle applicator. It will dry and clog. This happened to me on the first use. I figured I'd just use a fresh tip every time I needed to use it, but on the second use I realized that when I was done, I could just take the tip off and put it on one of the other bottles and fill it with warm water and flush all the glue out. Then I could put that tip back on the bottle with the glue in it and use it again days later. Worked fine.

Good and pliable squeeze bottles. However, tip definitely should have been a bit thicker because glue settles in so you have to clear it up frequently

These bottles are perfect for the precise glue application required for gluing wefts onto cosplay wigs. I love that they have both rubber and rigid lids to choose from. The bottles are big enough that I can work for quite a while without needing to refill them, and the seal means that I don't have to worry about the glue drying out. The bottles are flexible and strong. I also love that the bottles are transparent so you can see how much product is left in them.

I used these bottles to apply CA glue to scale models. The biggest concern that I have is that while the cap screws on securely, the tip is merely a press on fit. Initial use offered no issues or resistance to applying CA glue. Unfortunately, as is the case with most metal nozzles, glue builds up blocking the application of new glue and you have to heat it with a lighter to get the tube to open. Two problems with this setup: 1. The nozzles are very short so not a lot of room to work with 2. After using the bottle on a scale model, I covered the tip with a protective plastic cover I had. Using it three days later the tip was clogged (normal on any glue bottle) but after clearing the nozzle, I did a test flow delivery on cardboard and the tip popped off, emptying a large amount of CA glue... ( Note to self... ALWAYS test glue flow on something you do not care about!) I bought this not knowing about the press on fit tip. In the future I will be more careful to more fully examine glue bottles prior to purchase. If you have these, just be really careful and ALWAYS test CA glue flow prior to applying to a model part.

These small needle tip bottles work perfectly for my freeze and fuse glass fusing projects. The very fine tip allows me to dispense water in tight places and also just the right amount. Exactly what I was looking for.

Good

Used for intricate glueing and very easy to handle ,very easy to fill, need to be burped and tapped sp it does not clogged

I transferred all my very old (15-20 yr old) 3 in 1 oil to these bottles. The oil is still in perfect working order but the metal bottles could never been shut tight 100% so things got kind of messy. These squeeze bottles with the silicon caps also can't be shut tight 100% but pretty close to it. The needle tips also enable me to use the oil with zero waste which mean my 3 in 1 oil will last for at least another 5, 10 more years, wow!

The 30cc Needle Glue Bottle, Needle Tip Squeeze Bottle, Precision Tip Applicator Bottles, 5 Pack initially showed great potential as a precision glue application solution. However, its usability was short-lived. Initially, these bottles worked effectively for applying glue with precision, allowing for controlled dispensing and accurate application. The needle tip design seemed ideal for intricate projects and fine detail work. Unfortunately, the bottles quickly became unusable after a day or two of use due to the glue sealing the needle tip shut. Despite efforts to clean and maintain the bottles, the glue dried inside the needle, rendering it ineffective for further use. While the concept and design are commendable for their intended purpose, the longevity and practicality of these bottles fell short of expectations. For consistent and prolonged use, improvements in material or design to prevent glue from sealing the needle would be essential. In conclusion, while the 30cc Needle Glue Bottle initially performed well for precision glue application, its functionality diminished rapidly due to the glue sealing the needle tip. Consider alternative options if seeking a more durable solution for long-term use.

Je les utiles pour mettre de l'alcool à friction pour nettoyer des outils de précision avec un jet sous pression.

Used this to fill the paint on my irons after I refinished them. Worked great for intricate details. Only flaw is the bottles leak around the threads slightly, but nothing to be worried about