Orzero (3 Pack) TPU Screen Protector Compatible for Huawei P30 Pro (Not Glass) Protector De Pantalla Case Friendly High Definition Anti-Scratch Bubble-Free

The P30 is a fantastic phone. One of the unanticipated downsides to the beautiful curved screen is that there are not any glass protectors which really work well. Your only choice is film. I was reluctant to install this as my previous experience with film protectors has been less than great. They either interfere with touch, get bubbles underneath, and otherwise distract from the user experience. I was pleasantly surprised to find that these avoid most of those problems. The install is a bit different than most film protectors. I messed up the first one but, after watching the video it was super easy. Hah, I am a guy. Did you expect me to read the instructions first! Once installed it really, looks nice and clear without bubbles or other distortions. It is not quite as smooth as glass but does not exhibit the drag found in many other film protectors. The fingerprint reader works just the same before and after. I am not sure how much protection these actually offer but it is an inexpensive insurance policy for a great phone. Give it a try. I think you will be pleased, if not the cost is minimal.

well i'll start off by saying my first application was definitely user error. i watched the video a few times before applying so i knew what i was doing. HOWEVER, i didn't realize the top film on top of the screen protector itself would have weird lines on it. so i thought i used the wrong side of the squeegee to smooth out the protector. so i started on a second one. i used the other side of the squeegee and got all the way through the installation until peeling away the top film. and voila! perfect, seamless, and so so easy. so just a warning to others, those lines are normal and come off with the top film at the very end :) but of the actual product itself: easy install, NO BUBBLES (i had a few but they went away after 24 hours like they stated), almost complete screen coverage (although i think they could have gotten away with more), case friendly, smooth to the touch (although i can tell there's a protector on it bc i know what the real screen feels like), the inscreen sensor WORKS!! (with tempered glass i had previously it didn't work), you can barely tell it's there, and you get 3 for $10 which is a bargain for me. when i run out of these i will be ordering again :D and you should too

It comes with a lot of tools to help during the installation process. But it doesn't really help with the installation process. This is actually really challenging to install I gave it two tries already as the pictures show. There are way too many bubbles that are extra hard to get rid off. I find the tools helpful but the actual design of the product and installation process not easy. And again, this shouldn't be this difficult to install. I will install the third one and will update. Finger print works btw. UPDATE I watched the installation video. You need to scan the QR code on the back of the box for the Installagion video to watch it. Watching the video then installing the film makes so much more sense and with the tools provided by them helps so much!! The bubbles and the line in the middle went away seemlessly!! I installed that film on my P30 pro like a pro. But you need to watch the video!! Fingerprint still works. One drawback is that the film seems too thin to protect my screen from cracking but I'm not gonna actually test it on my phone unless I have a sponsored phone or something. Overall I would recommend this.

This is genuinely the best screen protector I've ever used. We all know that all of the glass options for this phone are utter garbage, so when I picked this up, I expected no different. It not being glass, I was skeptical about the installation and how well it would protect the phone, but all my worries melted away with the past week of use. It installs quite easily, and flawless results are extremely simple. The video provided is short, consistent, and easy to follow. When looking at the phone head on, the screen protector is completely hidden. It is case friendly as well, as I have tried on the stock case and the Spigen Clear Hybrid case, both not touching it at all. Honestly there are no other screen protectors on the market I would buy. Sticking to this one for life!

The worst product I have ever ordered. Waste of money!! First of all, the package was delivered and the sealant was obviously ripped off and package was opened before. Second, the material is bad, that it won’t really protect the screen. Finger print won’t read. Also, it is very hard and inconvenient to install and I have installed many screen protectors in the past. It leaves a lot of bubbles. The material is so cheap. I tried the first two protectors and they sucked. I took them off and trashed all three of the protectors. Very disappointed.

I thought I was buying the same brand I bought before, but before there were only two in the box, and they were much much better. They were thicker, and they curved naturally with the phone's screen. They even had a thin border that seemed like it was made of a metal of some sort. The three screen savers in this box are much much thinner, and they do *not* adhere well where the phone curves. Also, it is near impossible to get out all the air bubbles, even using their supposed "squeegie." I went through two of the screen savers in a week because they came undone on the edges.

I read on the ZTE community that this screen protector would work on the Axon 10 Pro. After installing it I'd have to say that it fits great. Hard to find a screen protector that fits great on a curved screen. Installation take a little bit of patience. Make sure you watch the YouTube video a couple of times; search "Orzero" or "Newzerol". It comes with three screen protectors, I only had to use one. Some reviewers mentioned that after installation a line is left down the middle including small bubbles that they could not get rid of. I had the same issue, but I used a heat gun (can use a hair dryer) and slowly worked out the bubbles and the line in the middle. I let the phone sit overnight and woke up to a line and bubble free screen. This is not a glass protector so don't expect it to resist scratches like a glass protector. This screen protector will not protect your screen from a drop. This screen protector is to prevent minor scratches that can occur from daily use or putting it in or taking it out of your pocket or purse. Also, since it's not a glass screen protector don't expect it to be as smooth to the touch. One last thing, the fingerprint reader still works great with the screen protector. Not bad for less than $10.

Took me about 2 minutes to install after watching the video provided. it fits PERFECTLY. i was nervous about aligning it too, but its super easy to align as well and it came out looking clean. I did get a few streaks because i was scraping out the bubbles slowly, so just make sure you do quick, firm, confident pulls. otherwise you make get streaks like i did. theyre really small bubbles though, so ill give it a few days to see if they go away. plus, there are 3 protectors here, so ive got room to breathe without spending much more on another protector. Fyi, i dont see how people could possibly have troubles installing the protector...its extremely straightforward. just watch the video on the amazon page or look at the video on their QR with "Huawei P30" in the title. or just follow the pictured instructions that come with the protectors. Also, fingerprint scanner works just like normal.

Received goods as described, super fast shipping, and a well packed shipment

Nice screen protector for P30 Pro. Needs a bit skill to put it on. The product itself is perfect.

صراحه قوي وعرض جميل ٣ وانا استخدمت ١ بس

Good screen protector, does not affect Fingerprint reader. Installation : First thing I recommend is going to youtube and watch a video of the installation process. I didn't the first try, and messed it up a bit ( removed too much of the back film before setting the protector on the screen) caused too many lines and bubbles. After watching a video, 2nd try was a breeze. You might still have some small bubbles , but they should all disappear within 24 hours as it sets. Great deal, comes with 3 protectors and everything needed for installation.

The installation instructions was very confusing, failed on the 1st attempt. But after watching a video on YouTube, it was fairly easy. Be careful about the step 4 on the protector, its #4 not necessarily refering to step 4 of instruction. And again great protector if installed properly, is just fits perfectly on my P30 pro, no bubbles at all, fits phone case. Highly recommend the product, as well as watching video prior to installation XP