General Finishes Oil Base Gel Stain, 1 Pint, Java

I've been entertaining the idea of gel staining my cabinets for a long time, however I never thought it would come to fruition until we decided to change out our kitchen countertops, floors, backsplash. I was thinking on replacing the doors/drawers and just painting it white, however the budget was already creeping up with other expenses and I feel my existing doors would look better as a dark espresso moreso than white. I've read the reviews, read questions/concerns, viewed many tutorials, etc and decided to pull the trigger. I would say our kitchen is on the larger side that includes 25 doors, 15 drawers, u-shaped with a large island. Overall I am happy with the product, outcome and it lived up to the hype. I knew it would require a lot of time and work, but if I could go back I would probably just hire someone. The amount of time it took in total could have easily been paid off by a professional and more if I used what I feel my time is worth based on what I can do to supplement my source of income through other means. On top of that I did sections of it before our kitchen demo/install and after. Since I am away from home for work10-12 hrs per day M-F,I could not be as efficient as I would have liked. I have oak cabinets stained walnut that were about 10 years old. I took steps similiar to many others, but broke it down into 3 sections of the kitchen since it was too large to get down at once. Prep time was probably the most tedious part that included- 1) Empty cabinets, 2) clean cabinets (I used krud kutter), 3) sand cabinets (I tried various grits and found 220 grit to be perfect lightly by hand; if I could go back I would have used a sander), 4) vacuum/wipe down cabinets, 5) tape down areas as needed. Imagine doing this 3 times. I used the sock method (with two non latex gloves). I just bought cheap socks from target/walmart I believe. I also had a small brush and sponge brush. I would the small brush was a lifesaver for the small crevices and corners. I did 4 layers of the Java stain in total. I waited 48 hours first the first coat to dry and 24 hours for the rest. I was expecting some streakiness, but was a little concerned after seeing it on the 3rd coat. 4th coat was the key winner. I think part of that is not optimally preparing some of my surface areas; poteintially due to different amount of protective coating found in different areas of my kitchen. Also the area above my range was probably not cleaned as well as it should have been. I did all my doors/drawers in the garage and numbered each one. I did not sand inbetween coats. After the final coat the stain was beautiful. Even the floor, granite installers, contrator was impressed with the work. The satin gloss is very subtle. I was damn impressed. Then came the clear coating. I waited an entire week before applying it. I then very lightly sanded with highest grit sanding sponge I could find (I believe it was 220) and wiped the dust down. I used wipe on with rag/sock and sponge brush. I found all methods to work great. Very easy to go on and gives you a lot of wiggle room. I initially purchased the GF Gel Top Coat in Satin. http://www.amazon.com/GF-Gel-Topcoat-Satin-Quart/dp/B001F7R320. I did 3 coats on my island and a standalone cabinet and it came out great. It also whitstanded through the demo believe it or not. The satin sheen was similiar to the Java satin sheen and if anything you could see the grains of the oak cabinets a little more. I did not notice it enriching the color significant either. It kept it pretty consistent. I was very happy about the results, but I decided to try another product due to the high VOC content of the top coat (wife is pregnant and insist to use part of the kitchen). Since this was still 1/4 way through I had to be reasonable and ended up purchasing a non-VOC top coat off in satin from another website. This is when it all went downhill. I didn't realize what type of skill is needed to apply a top coat, until I purchased this. It made me realize how good the GF topcoat was. My cabinets looked horrible. I should have tested it out first. It was 10x more diffiucult to apply and my cabinets not only looked streaky, but their satin looked more like semi-gloss. It also darkened the cabinets noticably more compared to the original coating. I thought I ruined my kitchen. I decided to do more research and found that the most important coat is the last coat. I learned better technique and tools and redid a large portion of my kitchen. Luckily my new technique did wonders and I was able to coat it streak free and the sheen was also a lot less subtle for some reason. Possibly due to putting it on thinner and I made sure I mixed it very well. I did 3 coats total. The end result came out great despite the scare. I ended up using 2 quarts and still have a little left over. It took me about 6 weeks solo to do my large kitchen, working full-time and other priorities that I could not push back. Like I mentioned if I could go back I would have just hired someone, but that is only because I can supplement my income in a lot less time I spent doing this project to just hire someone. I think that there are so much variables to consider before just doing it so do your research, be patient and trial and error. Everyone's surfaces are different; different wood, coatings, dirt, details, etc. So understand the optimal way to prep for your actual surface. I also think technique and having the right tools plays a role especially if you have a more challenging surface such as a door with all types of crevices, details, corners, etc. Too me that was the most difficult part was because of those challenging areas of the door. So my two biggest tips would be good preperation for your project and learning the proper technique/tools to do the job. Oh yeah and patience too.

Very forgiving & easy to use. As you can see, it's also very versatile! I used stain on both kitchen cabinets (2coats) &on top of stools (3 coats), with different results based on technique. For cabinets & banister (1 heavier coat), I used a foam brush & they did not get "wiped off" between coats, so coverage is darker, more opaque & more like that of paint. On stool tops & stair treads (3 coats), stain was wiped on using old white socks &, therefore, is more translucent & more grain is showing through. Mantel only got one coat using sock method & the pretty grain is showing through beautifully. Looks a lot like a walnut stain. I'm very happy with the results! Gorgeous upgrades to golden oak without the price tag of a replacement. WIN! A few tidbits: 1- it does have an odor. I have sensitivities to chemical vapors, so I wore a carbon filtered mask & kept windows open while I worked in short time frames & was fine. I then ran ceiling fan & sat outside or ran errands while it dried a bit & the odor dissapated. The one time I took the mask of early to clean up in the kitchen I got a huge headache & did not make that mistake again! 2-Do not go over previous stained spots until they are completely dry (I gave them 24 hrs between coats). You end up pulling the previous stain & you now have a splotch w/very little pigment. Not pretty! Wait, and just add the extra coverage you want on the next coat. Otherwise you just end up pushing the pigment around & it doesn't stick to anything already gone over before. 3-And the BEST tip for last. I put off using this product (& thus my projects) for a long time due to the fear brought about by people warning it stains skin, nails, & basically everything it touches & their horrible experiences of trying to get it off. Well, turns out it's SUPER EASY to get off your body if you use coconut oil! I just scoop a dab from my jar, rub it all over where I have stain (it smears all over & looks like you're just making a bigger mess, but don't worry!!). It then just comes right off & transfers to the paper towel I use to wipe it off. Another WIN! I then did not use my jar for any other purpose, but for this since some stain did transfer from my hand & onto oil in the jar. So I recommend pulling some out & placing in a second container to use specifically for this purpose & not having to sacrifice a huge container of it. Also, I have not had any luck finding a way to get it out of clothing, though, so I do recommend wearing your appointed "Painting clothes" when working with this. Hope this helps & have fun with your project!

I am doing away with all the honey oak in our house - and there is A LOT. I started with the vanity in the bathrooms and then moved on to the kitchen (which is in process now) and railings. This stuff is GREAT. Here is why I like it so much: 1. Once you get the process down it's easy-peasy to complete - just takes time (see below for my process) 2. It's a very rich color - it may look black and at first glance however it is a very dark rich brown 3. I have put the top coat on (GF High Performance water based in satin) for most of my work and it seems to be holding up well - good with humidity (vanities in the bathrooms) and constant use (railings) 4. Keeps my wood grain so it looks more natural than painting 5. What do you need: gel stain, top coat, sand paper, TSP substitute cleaner, lint free rags, foam brushes, drop cloth, painters tape You must have patience while going through the process - not so much for application but making sure you allow sufficient dry time between coats - with proper prep I was able to get to the full dark color in about 3 coats (I may have had to touch up some spots here or there. Here is my process: 1. lightly sand surface (break up the top coat) - if you look online you see folks that say you don't need to sand - while that is true, I found I needed an additional 2 coats if I didn't do this prep - thats more material and another 48 hours added on to my time, so I took the time and prepped properly. 2. Use a TSP substitute (also a deglosser) to help with what you just broke up. I followed directions for diluting the solution and sprayed it on (cover other surfaces!!) and let sit for at least 5 minutes then wipe off with a damp cloth. 3. after that has dried, grab some gloves and crappy clothes and a foam brush and start the application - first make sure you stir the gel stain well and put it on your application area thick - I mean, it looks like you can finger paint in it thick - you shouldn't see much of the actual wood at this point 4. Wait - once you apply the gel stain (make sure not to apply to an area too big - you can't have it dry before wiping off) you wait about 10 mins (humidity, temp etc will affect it) you can start wiping it off. I always brush the foam over my rag to put a little down - if you start with a 100% clean cloth you will take off more material than you want to. You want to wipe it down until it looks like there is no more sitting on top - don't press too hard, some of what set was directly on the wood - but you don't want "globs" of the stuff left on there - I'll try and get a pic of this as I work through my cabinets. 5. Now wait some more - 24 hours minimum to be exact between each coat - DO NOT SKIMP ON THIS or you will not be pleased. 6. After all coats are complete slap a clear coat on there (after waiting 72 hours after last application before clear coat) which thankfully you can get 3 coats on in 1 swoop as there is only a 2 hour dry time (for the GF clear coat) If you're not sure this is for you - pick a small project first, or even just a random board so you know how it goes - it's not for the weak of heart but I do love the outcome and would do it again and have never even considered using another brand of gel stain!

I am a beginner at renewing furniture. I buy stuff at Goodwill or other thrift stores & renew it. I am still learning. I have read so many blogs (on pinterest) that recommend this product. You can use this over old stain (you don't have to completely strip the item, you just sand off the glossy topcoat), bare wood, & even paint. The stain was so easy to use. I applied it with an old cotton t-shirt torn into rags. It is such a beautiful color. I made a medicine cabinet & painted the inside with a very thin coat of white (mixed with a little water) so you could still see the grain, then I sanded the edges to see the wood. I left the outside frame bare wood & used stain over the entire piece. When I put the stain over the paint, I let it set for a few moments then wiped it off, just to tint the paint (I focused on the edges a little more). It turned out great!! Shipping was a pain though...it took what seemed like forever, but in reality it only took 5 days, I ordered it on a Friday & it came the following Wednesday. When I checked the 'Your Orders' section of amazon, for some reason it said I ordered GF Java gel stain but the picture was of GF gel stain in antique walnut so I called Woodcraft & they said they didn't know why the picture was wrong but I did order the right one, General Finishes Java Gel Stain. When it arrived, I wasn't here but since I didn't have to sign for it, they left it in between my doors. When I opened the box, there was a lot of packing inside to protect it during shipping but somehow the can was dented. It looks like chocolate pudding when you first open it but once you stir it (do NOT shake it, that produces bubbles in the finish) it will look like melted chocolate. This is a one of a kind product. I would recommend it to anyone, especially to beginners. It is very easy to use. The color is one of a kind. Many refer to this color as the “Pottery Barn finish” which I would say is pretty accurate. This is a dark espresso color that you won’t find in any other brand, especially one that goes on so easily & smoothly. I have read about a lot of products on blogs & then went out & excitedly bought them to be nothing short of disappointed. But this product was very different…all the great things you read about this gel stain are accurate. Well worth the money. You will not be disappointed.

This is the first time I’ve used anything from this company, and I love it so much! I checked out a bunch of images on Pinterest before I bought this, because it does cost a pretty penny for only a quart of stain. It’s well worth the cost though. When I first opened the can, the first thing I noticed was the scent. It reminds me of the cherry almond lotion that I had as a kid, it smells really good! Definitely better than other stains. The gel is thick and does not drip, even when I painted on vertical surfaces. I have an old laminate covered dining room table that I’ve been wanting to redo forever, which, because it is laminate, cannot typically be stained. One of the posts I found online mentioned using primer under the stain. Since it’s laminate I knew I wasn’t going to see wood grain anyway, I gave it a try. It works great! The primer is giving the stain something extra to grip, and the color is turning out beautiful. I’ve done one coat so far, and if I had known how much I would like the way one coat looked I would have been careful with making straight lines. Using a foam brush and going in straight lines is actually giving the table the appearance of wood grain. It looks so pretty, but unfortunately I wasn’t being particularly careful with the first coat since I’m planning on doing 2 or 3. The second coat I was much more careful, and the way I did it actually gave the appearance of wood grain. I love it! The table I painted sits 6 people with room to spare, and that's without the two extra leaves, so I had a lot of table surface to cover. I only used a little less than a quarter of the container, and that's with doing two coats on both the table surface and edges and the two leaves, and I was not being stingy with application. The first picture is after one coat, the other two are after two coats. *NOTE: General Finishes does not recommend using this on laminate, so do so it at your own risk. I myself rely heavily on reviews when it comes to deciding whether or not I’m going to purchase something, so my reviews are completely honest. If my opinion of the quality of this product changes, I will update my review accordingly. Please let me know if my review was helpful to you by voting yes below, and let me know if you have any questions!

This is an excellent product in that it covers almost any surface. Having said that, I had two major issues : 1) The majority of blogs and reviews I read used the java gel stain to cover golden oak. I, on the other hand, had whitewashed/pickled oak cabinets from the 1980's that had black metal trim on the doors. The stain eventually covered everything, but it took four coats. This means that each side needs four coats with 24 hours drying time between each coat - that entails a lot of days to finish a door and a lot of patience. Be forewarned - if you don't have patience this product is not for you. Trying to rush the process ruins the finish. I also applied four coats of arm r seal which also requires 24 hours between coats. Do the math - this is a time consuming project. 2) Read the blogs carefully. Many people gel stained a bathroom vanity or a banister or a cabinet, etc. If you are doing your kitchen, you need to be realistic about the amount of time it will take. In my case I had 24 doors and 9 drawers. Keep in mind the quality of your kitchen. If you have a contractor grade cabinets, the doors will be manageable. If you have custom 96" high cabinets that reach the ceiling (as I do), understand that staining tall doors without bubbles and drips is difficult and unwieldy unless you are an avid diy person. Your boxes need to be stained as well and the toe kick and any crown molding you might have. I'm not trying to be discouraging, but anyone who undertakes a kitchen needs to be aware of the time and effort involved. As of today, my island and base cabinets are done and look beautiful. However, even though all my upper cabinet boxes, sub zero end panel, wall oven cabinet and pantry boxes are done, the doors are not on yet because I am still finishing applying arm r seal. It seems endless, but the cabinets do look like new and make the kitchen updated. I have never attempted any project like this before, and I definitely have mistakes - drips, bubbles, etc. which are not obvious, but overall I think the product is excellent and has rejuvenated my kitchen. BTW I used 2" foam brushes throughout the process and brushed on the product without wiping it off.

I read many reviews on this product and most were raving, so I figured I would give it a shot and try it on my powder room vanity cabinets. They are about 13 years old and had a very nice white finish, but I became bored and wanted the espresso color. It really delivered the color I wanted and on white cabinets I ended up with a true beautiful dark espresso. A coupe of concerns. If you read the product warnings, you must avoid inhaling this stuff! In fact there can be some very bad side effects including, brain damage. That's basically the first thing printed n the can. Even in a well ventilated room, the fumes are hard to get rid of. I did a small powder room, and was considering doing my kitchen, however I have pets and have a concern about the fumes, and they remain even after the product is dry. Maybe I am overacting but I can't imagine using this in my kitchen, and am wondering if others had a concern about the fumes. Other than that, it was easy to work with and apply using the sock method. I did the insides of the cabinets first so I could get the hang of it, and it is best to apply thin coats and allow at least 6 hours drying time between coats. I did not gave any problem with streaking and the finish looks very professional. I liked the finish the product itself gives, flat or satin. You can apply polyurethane top coat, but then it appears more glossy than I am looking for. With three coats of the product alone and after it cures and hardens, I don't really see the need for a top coat, but that's a personal preference. Overall, a very good product for the price, and a cheap update for your cabinets. I highly recomnend. UpDate: after several months, today is 8/28/15 with this product on my cabinets, I want to report that they have held up superbly and look as beautiful as the day they were done. I have gone over the reviews here and want to address a couple of things. Chipping, I think it all goes back to the prep work and wait time between coats, I have had no problem like that at all. One thing that is really necessary especially in a kitchen, is to thoroughly clean and de grease the cabinets prior to applying the stain. Use something like TSP. that may be as important as the sanding, but honestly, I just did scuffing more than sanding, maybe 1 minute on each door. I also want to address the use of a poly sealer after your stain dries. This is a self settling product that "cures" in 14 days. In other words, it is cured and sealed. The product itself dries to a beautiful matte finish with just enough lusture, that if you use poly coat it will just add more shine than you need, unless that is your desired look. Not everyone will agree with me, but I didn't put a sealer on my cabinets and they look stunning just the way they are. I will add though that I did put the long European bar pulls ( hardware ) on the doors and no one touchs the actual cabinets, that may have made a difference. As far as the fumes mentioned in my review, I still maintain that they are rather strong, and you should be in a well ventalated area, open windows, fans etc. but, the fumes completely go away when the stain dries. Would I do thus project again? Yes! A lot of prep work and wait time, but like others have said, it really pays off at the end. I am about to prep a rental property I own for sale, and I will be doing all the cabinets with this....( sigh ) Just ordered two cans....here I go again!

I saw this stain used for a DIY project via Pinterest. I used the same technique the blogger did... applied it with a men's cotton sock. The first coat went on beautifully. The second coat was very blotchy, but as the blogger advised, I kept the faith. After the third coat, the results were stunning! Very dark, very rich and smooth. I love the gel consistency, as it makes it much less messy and much easier to apply smoothly and evenly without the need for wiping. If you follow the manufacturer's directions, you can't go wrong. It is super easy to use, even for those of us who have no idea what we're doing! A little bit of this stain goes a long way. I bought the quart-size can, and I have put three coats on 22 cabinet doors, 8 drawer fronts, and the framing for each of these. My kitchen has a total of 25 cabinets, 11 drawers, two corner cabinets, one lazy Susan, and two 6 foot folding pantry doors, and measures approx 14ft x 11ft, and I think I am going to be just short of enough stain to complete the project. This stain dries with a fairly flat finish, so I advise a follow up with good quality clear coat. The blogger used a water-based poly by General Finishes. I used a water-based clear lacquer called Ultrastar by M.I. Campbell in a satin finish, simply because my husband works in the pre-finished wood industry, and it was leftover product that was going to be discarded. It worked fine to use a water-based clear coat over this oil-based stain. Also, because the stain is very dark, you can use a satin finish clear coat and still end up with a final product that has the look of semi-gloss. Tips: *Double-glove under your rag or sock if you use that application method *Cleanup is easy with mineral spirits *If refinishing a surface that is already stained/cleared, just give it a light sanding to scuff up the smoothness of the clear coat. No need to strip or sand the surface down to the bare wood *Several (3 or more) light coats produce better results than 2 heavy coats *Do not overwipe if you use the rag or sock method *Resist the urge to apply (what you think will be) the final coat a little heavier than the previous coats. If you go too heavy, the wood may appear to be painted black. It is better to have to apply one more coat that you thought than to lose your wood grain *Clear coat will bring out the wood grain fantastically.

Product is very good. Delivery took weeks :(